[Aug 04, 2021] Updates Up to 365 days On Valid 350-401 Braindumps [Q115-Q132]

Share

[Aug 04, 2021] Updates Up to 365 days On Valid 350-401 Braindumps

Best Quality350-401 Exam Questions  Cisco Test To Gain Brilliante Result

NEW QUESTION 115
Which method displays text directly into the active console with a synchronous EEM applet policy?

  • A. event manager applet boom
    event syslog pattern 'UP'
    action 1.0 gets 'logging directly to console'
  • B. event manager applet boom
    event syslog pattern 'UP'
    action 1.0 puts 'logging directly to console'
  • C. event manager applet boom
    event syslog pattern 'UP'
    action 1.0 string 'logging directly to console'
  • D. event manager applet boom
    event syslog pattern 'UP'
    action 1.0 syslog priority direct msg 'logging directly to console'

Answer: D

 

NEW QUESTION 116
In an SD-Access solution what is the role of a fabric edge node?

  • A. to connect wired endpoint to the SD-Access fabric
  • B. to connect the fusion router to the SD-Access fabric
  • C. to advertise fabric IP address space to external network
  • D. to connect external Layer 3- network to the SD-Access fabric

Answer: A

Explanation:
Explanation
+ Fabric edge node: This fabric device (for example, access or distribution layer device) connects wired endpoints to the SDA fabric.

 

NEW QUESTION 117
Refer to the exhibit.

A port channel is configured between SW2 and SW3. SW2 is not running a Cisco operating system. When all physical connections are mode, the port channel does not establish. Based on the configuration excerpt of SW3, what is the cause of the problem?

  • A. The port-channel interface lead balance should be set to src-mac
  • B. The port channel on SW2 is using an incompatible protocol.
  • C. The port-channel should be set to auto.
  • D. The port-channel trunk is not allowing the native VLAN.

Answer: B

Explanation:
Explanation
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

 

NEW QUESTION 118
Refer to the exhibit.

Which LISP component do routers in the public IP network use to
forward traffic between the two networks?

  • A. RLOC
  • B. EID
  • C. map resolver
  • D. map server

Answer: A

Explanation:
Explanation
Locator ID Separation Protocol (LISP) is a network architecture and protocol that implements the use of two namespaces instead of a single IP address:
+ Endpoint identifiers (EIDs) - assigned to end hosts.
+ Routing locators (RLOCs) - assigned to devices (primarily routers) that make up the global routing system.

 

NEW QUESTION 119
Drag and drop the characteristics from the left onto the orchestration tools they describe on the right.

Answer:

Explanation:

 

NEW QUESTION 120
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.

Answer:

Explanation:

Explanation

 

NEW QUESTION 121
Which PAgP mode combination prevents an Etherchannel from forming?

  • A. auto/desirable
  • B. desirable
  • C. auto/auto
  • D. desirable/desirable

Answer: C

Explanation:
Explanation
There are two PAgP modes:

The table below lists if an EtherChannel will be formed or not for PAgP:

 

NEW QUESTION 122
Refer to the exhibit.

What is the effect of the configuration''

  • A. The device will authenticate all users connecting to vty lines 0 through 4 against TACACS+
  • B. When users attempt to connect to vty lines 0 through 4. the device will authenticate them against TACACS* if local authentication fails
  • C. The device will allow users at 192.168.0.202 to connect to vty lines 0 through 4 using the password ciscotestkey
  • D. The device will allow only users at 192 168.0.202 to connect to vty lines 0 through 4

Answer: A

 

NEW QUESTION 123

Refer to the exhibit. An engineer attempts to configure a router on a stick to route packets between Clients, Servers, and Printers; however, initial tests show that this configuration is not working. Which command set resolves this issue?
A)

B)

C)

D)

  • A. Option D
  • B. Option C
  • C. Option A
  • D. Option B

Answer: B

Explanation:
Explanation
We must reconfigure the IP address after assigning or removing an interface to a VRF. Otherwise that interface does not have an IP address.

 

NEW QUESTION 124
Refer to the exhibit.

Which configuration must be applied to R1 to enable R1 to reach the server at 172.16.0.1?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 125
Which statement about VXLAN is true?

  • A. VXLAN uses TCP 35 the transport protocol over the physical data cento network
  • B. VXLAN encapsulates a Layer 2 frame in an IP-UDP header, which allows Layer 2 adjacency across router boundaries.
  • C. VXLAN extends the Layer 2 Segment ID field to 24-bits. which allows up to 4094 unique Layer 2 segments over the same network.
  • D. VXLAN uses the Spanning Tree Protocol for loop prevention.

Answer: B

Explanation:
Explanation
802.1Q VLAN identifier space is only 12 bits. The VXLAN identifier space is 24 bits. This doubling in size allows the VXLAN ID space to support 16 million Layer 2 segments -> Answer 'VXLAN extends the Layer 2 Segment ID field to 24-bits, which allows up to 4094 unique Layer 2 segments over the same network' is not correct.
VXLAN is a MAC-in-UDP encapsulation method that is used in order to extend a Layer 2 or Layer 3 overlay network over a Layer 3 infrastructure that already exists.

 

NEW QUESTION 126
How does SSO work with HSRP to minimize network disruptions?

  • A. It enables HSRP to elect another switch in the group as the active HSRP switch.
  • B. It enables HSRP to failover to the standby RP on the same device.
  • C. It enables data forwarding along known routes following a switchover, white the routing protocol reconverges.
  • D. It ensures fast failover in the case of link failure.

Answer: B

Explanation:
Explanation
SSO HSRP alters the behavior of HSRP when a device with redundant Route Processors (RPs) is configured for stateful switchover (SSO) redundancy mode. When an RP is active and the other RP is standby, SSO enables the standby RP to take over if the active RP fails.
The SSO HSRP feature enables the Cisco IOS HSRP subsystem software to detect that a standby RP is installed and the system is configured in SSO redundancy mode. Further, if the active RP fails, no change occurs to the HSRP group itself and traffic continues to be forwarded through the current active gateway device.

 

NEW QUESTION 127
Drag and drop the REST API authentication methods from the left onto their descriptions on the right.

Answer:

Explanation:

 

NEW QUESTION 128
Which two results occur if Cisco DNA Center loses connectivity to devices in the SD-Access fabric?
(Choose two )

  • A. Users lose connectivity
  • B. All devices reload after detecting loss of connection to Cisco DNA Center
  • C. User connectivity is unaffected.
  • D. Cisco DNA Center is unable to collect monitoring data in Assurance.
  • E. Already connected users are unaffected, but new users cannot connect

Answer: C,D

 

NEW QUESTION 129
Into which two pieces of information does the LISP protocol split the device identity?
(Choose two)

  • A. Enterprise Identifier
  • B. Device ID
  • C. Resource Location
  • D. LISP ID
  • E. Endpoint Identifier
  • F. Routing Locator

Answer: E,F

Explanation:
Locator ID Separation Protocol (LISP) is a network architecture and protocol that implements the use of two namespaces instead of a single IP address:
+ Endpoint identifiers (EIDs)-assigned to end hosts.
+ Routing locators (RLOCs)-assigned to devices (primarily routers) that make up the global routing system.
Reference:
3s/irl-xe-3s-book/irl-overview.html

 

NEW QUESTION 130
Refer to the exhibit.

An engineer is troubleshooting a connectivity issue and executes a traceoute. What does the result confirm?

  • A. The destination server reported it is too busy
  • B. The destination port is unreachable
  • C. The protocol is unreachable
  • D. The probe timed out

Answer: C

 

NEW QUESTION 131
Drag and drop the threat defense solutions from the left onto their descriptions on the right.

Answer:

Explanation:

 

NEW QUESTION 132
......

Focus on 350-401 All-in-One Exam Guide For Quick Preparation: https://www.lead1pass.com/Cisco/350-401-practice-exam-dumps.html

Tested Material Used To 350-401: https://drive.google.com/open?id=18f2VNf4SkS9mAUo2jkx63vEq351hfJ4J