The Ultimate Cisco 350-801 Dumps PDF Review
Achieve The Utmost Performance In 350-801 Exam Pass Guaranteed
NEW QUESTION # 155
Refer to the exhibit.
Refer to the exhibit. A customer submits this debug output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with an ISDN BRI interface, which BRI changes resolve the issue?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 156
Due to provider requirements, outgoing calls from the Enterprise to the PSTN must start with channel 1.
Which ISDN command changes the channel selection an IOS to meet this requirement?
- A. isdn incoming-voice voice
- B. isdn protocol-emulate network
- C. isdn bchan-number-order decending
- D. isdn bchan-number-order ascending
Answer: D
NEW QUESTION # 157
Which type of greeting in the Call Handler configuration in Cisco Unity Connection overtimes all other greetings?
- A. priority
- B. alternate
- C. supervisory
- D. holidays
Answer: B
NEW QUESTION # 158
Which characteristic of distributed class-based weighted fair queueing addresses jitter prevention?
- A. It provides additional granularity by allowing a user to define custom classes
- B. lt provides additional granularity by allowing a user to create classes
- C. It minimizes jitter by implementing a priority queue for voice traffic
- D. It uses a priority queue for voice traffic to avoid jitter
Answer: C
NEW QUESTION # 159
What are two characteristics of QoS Traffic shaping? (Choose two.)
- A. Traffic shaping queues excess packets.
- B. Traffic shaping can be applied to outbound traffic on an interface.
- C. When the traffic rate equals the configured maximum rate, excess traffic is dropped.
- D. When the traffic rate equals the configured maximum rate, excess traffic is remarked.
- E. Traffic shaping can be applied to inbound traffic on an interface.
Answer: A,B
NEW QUESTION # 160
Drag and Drop Question
Drag and drop the SNMPv3 message types from the left onto the corresponding definitions on the right.
Answer:
Explanation:
NEW QUESTION # 161
An engineer must configure a cisco ISR 4000 as an MGCP gateway to download its MGCP- specific configuration from cisco UCM. Which Cisco IOS configuration snippet accomplishes this task?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: D
NEW QUESTION # 162
Refer to exhibit.
A company recently deployed CISCO Jabber Users log in to Jabber by using their email address in a domain named company com. The users report that they cannot register their telephony services when working from unless they use a VPN. An engineer runs DNS lookup tool in Cisco Expressway-C to troubleshoot tie What IS me cause of the issue?
- A. There must be only response for the company.com domain
- B. The TTL value for the company.com is too short.
- C. The company com domain must be resolved only in Expressway-E
- D. There is a missing SRV record for the company.com domain.
Answer: D
NEW QUESTION # 163
End users report bad video quality and voice choppiness on Cisco Collaboration endpoints. The engineer changed the device pool the users were in but did not correct the problem. Which action should be taken to troubleshoot this issue?
- A. Check for duplex/speed mismatches between the network port settings of the system and network switch
- B. Use direct IP address calls between two endpoints to troubleshoot call quality issues
- C. Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to "false"
- D. Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher
Answer: C
Explanation:
Section: QoS
NEW QUESTION # 164
An engineer is configuring a Cisco Unified Border Element to allow the video endpoints to negotiate without the Cisco Unified Border Element interfering in the process. What should the engineer configure on the Cisco Unified Border Element to support this process?
- A. Configure codec transparent on the dial peers.
- B. Configure pass-thru content sdp on the voice service.
- C. Configure a hardcoded codec on the dial peers.
- D. Configure a transcoder for video protocols.
Answer: A
Explanation:
Section: Protocols, Codecs, and Endpoints
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/cube-codec-basic.html
NEW QUESTION # 165
Refer to the exhibit.
Which two codec permutations should be transcoded by this dspfarm? (Choose two )
- A. G.729ar8 to G.711alaw
- B. G.722 to G 729r8
- C. iLBC to G.7l1ulaw
- D. G.729br8toG711alaw
- E. G.729r8 to G711ulaw
Answer: A,E
NEW QUESTION # 166
Which command is used in Cisco IOS XE TDM gateway to configure the voice T1/E1 controller to provide clocking?
- A. clock source internal
- B. clock source network
- C. Cisco IOS XE TDM gateway T1/E1 controller cannot provide clocking.
- D. clock source line
Answer: A
Explanation:
Section: Cisco IOS XE Gateway and Media Resources
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/NIM/software/configuration/ guide/4gen-t1-e1-nim-guide.html
NEW QUESTION # 167
Refer to the exhibit. Which outgoing m-line SDP is sent to Cisco UCM after matching the appropriate dial peers via Cisco Unified Border Element?
- A. m=audio 16550 RTP/AVP 18 0
a=rtpmap:0 PCMU/8000/1
a=rtpmap:18 G729/8000/1 - B. m=audio 16550 RTP/AVP 0 8 18
a=rtpmap:0 PCMU/8000/1
a=rtpmap:8 PCMA/8000/1
a=rtpmap:18 G729/8000/1 - C. m=audio 16550 RTP/AVP 8 0 18
a=rtpmap:0 PCMU/8000/1
a=rtpmap:8 PCMA/8000/1
a=rtpmap:18 G729/8000/1 - D. m=audio 16550 RTP/AVP 18 0
a=rtpmap:8 PCMA/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpmap:18 G729/8000/1
Answer: A
NEW QUESTION # 168
Which two DNS records must be created to configure Service Discovery for or premises Jabber? (Choose two.)
- A. _cuplogin._tls.cisco com pointing to the IP address of IM&P
- B. _xmpp._tls.cisco.com pointing to a record of IM&P
- C. _cisco-uds._tcp.cisco com painting to a record of Cisco Unified CM
- D. _cisco-uds._tls.cisco.com pointing to the IP address of Cisco Unified Communications Manager
- E. _cuplogin._tcp.cisco.com pointing to a record of IM&P
Answer: D,E
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/ CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns- configuration-guide_chapter_010.html
NEW QUESTION # 169
Which packet delay is the maximum supported between Cisco Unified Communications Manager nodes for clustering over WAN deployments?
- A. 40 ms round trip
- B. 80 ms round trip
- C. 510 ms round trip
- D. 150 ms round trip
Answer: B
NEW QUESTION # 170
Which two approaches are taken to implement CAC within Cisco UCM in full-mesh topology?
(Choose two.)
- A. device pool
- B. RSVP-enabled locations
- C. location-based CAC
- D. physical location
- E. Audio Codec Preference List
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_ SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-
100_chapter_01000.html
NEW QUESTION # 171
An engineer configures a new phone in Cisco UCM The phone boots and gets IP when it connects to the network, however the phone fails to register With CISCO UCM, The engineer observes that the phone has a status Rejected In CISCO UCM What must be verified first 'Mien troubleshooting the issue?
- A. whether the Initial Trust List and Certificate Trust List files on the phone are correct
- B. whether auto-registration is enabled in Cisco UCM
- C. whether the phone's MAC address is correct In Cisco UCM
- D. whether the phone ts in the correct VLAN
Answer: B
Explanation:
b) whether the Initial Trust List and Certificate Trust List files on the phone are correct is not the first thing to verify, but it may be a possible cause of the issue if the phone has an ITL file from another cluster that prevents it from registering with Cisco UCM2. To resolve this issue, the ITL file needs to be deleted from the phone or exchanged between the clusters2.
c) whether the phone is in the correct VLAN is not the first thing to verify, but it may be a possible cause of the issue if the phone is not in the same VLAN as the Cisco UCM server or cannot reach it due to network issues3. To resolve this issue, the network connectivity and VLAN configuration need to be checked and fixed3.
d) whether the phone's MAC address is correct in Cisco UCM is not the first thing to verify, but it may be a possible cause of the issue if the phone's MAC address does not match the one configured in Cisco UCM. To resolve this issue, the MAC address needs to be corrected and updated in Cisco UCM.
Explanation:
This is the first thing that must be verified when troubleshooting the issue of phone status showing rejected in Cisco UCM1. Auto-registration allows new phones to register with Cisco UCM without manual configuration1. If auto-registration is disabled, the phone will not be able to register and will show a rejected status1.
The other options are not the first things that must be verified when troubleshooting the issue:
NEW QUESTION # 172
An administrator must configure the local route group feature on cisco UCM. Which step will enable this feature?
- A. For each device pool. configure a route group to use as a Local Route Group for that device pool
- B. For each route group, check the box for the Local Route Group feature.
- C. For each route pattern, select the Local Route Group as the destination.
- D. For each route list configure a route group to use as a Local Route Group.
Answer: A
NEW QUESTION # 173
Refer to the exhibit. Assume that the bottom logical partition policy entry in Cisco Unified Communications Manager was provisioned last.
How is the call treated when an IP phone in the Bangalore GeoLocation places a call to a MGCP gateway with FXS ports in the San Jose GeoLocation?
- A. The call is denied because the call flow matches neither policy entries.
- B. The call is denied because the last added logical partition policy takes precedence when multiple matches exist.
- C. The call is allowed because the first listed logical partition policy takes precedence when multiple matches exist.
- D. The call is allowed because the call flow matches neither policy entries.
- E. The call is allowed because only the top policy entry matches the call flow.
Answer: B
NEW QUESTION # 174
Given the H.323 gateway configuration and using Cisco best practices, how must the called party transformation pattern be configured to ensure that a proper ISDN type of number is set?
- A.
- B.
- C.
- D.
- E.
Answer: D
NEW QUESTION # 175
What is the major difference between the two possible Cisco IM and presence high-availability modes?
- A. Balanced mode provides user load balancing and user failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing. - B. Balanced mode provides user load failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, and is also provides load balancing. - C. Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, but is does not provide load balancing. - D. Balanced mode provides user load balancing and user failover only for manually generated failovers.
Active/standby made provides an unconfigured standby node in the event of an outage, but it does not provide load balancing.
Answer: A
NEW QUESTION # 176
A collaboration engineer must optimize the dial plan within Cisco UCM. There are multiple remote sites. And each site has its own route patterns and local gateways. What should the engineer do on the cisco UCM to optimize the dial plan?
- A. Implement ILS with GDPR so the dial plan can dynamically replicate across clusters.
- B. Leverage Cisco UCM Express as SRST so the phones can have more features of each remote site
- C. Create a centralized dial plan with a Cisco UCM Session Management Edition cluster or a Cisco gatekeeper.
- D. Configure a Standard Local Route Group to use a single route pattern for all calls within the cluster.
Answer: A
NEW QUESTION # 177
A customer wants to conduct B2B video calls with a partner using an on-premises conferencing solution. Which two devices are needed to facilitate this request? (Choose two.)
- A. MGCP gateway
- B. Expressway-C
- C. Cisco Unified Border Element
- D. Cisco TelePresence Management Suite
- E. Expressway-E
Answer: B,E
NEW QUESTION # 178
Which two actions must be taken to provision a new device using self-provisioning?
- A. Link the appropriate service profile to the provisioning template.
- B. Ensure the user has a directory URI and a primary extension.
- C. Import the user profile to the corporate LDAP directory.
- D. Enable the self-provisioning IVR in the Cisco UCM
- E. Link the appropriate universal device template to the user profile.
Answer: D,E
Explanation:
Self-Provisioning of a phone to a user needs:
* an End user with a primary extension and a Feature Group Template
* the Feature Group Template needs a User Profile
* the User Profile needs a Universal Line and Universal Device Template Finally to activate it you need a CTI route point and a configured IVR service to actually register it.
HOWEVER, it looks like you dont actually NEED the IVR to technically fullfil the goal of self- registration, as users can use the URL based registration. but i am not 100% sure if you wont need the IVR anyways, even if you arent using it - the guide is not 100% clear on that
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communications- manager-callmanager/214228-configure-self-provisioning-feature-on-c.html
NEW QUESTION # 179
Which datastore and protocol is used for saving back-up files within the Disaster Recovery System of Cisco UCM?
- A. local disk on the Cisco UCM server
- B. remote disk on the SFTP server
- C. remote disk on a CIFS share
- D. remote disk on an NFS share
Answer: B
NEW QUESTION # 180
......
Cisco 350-801 exam is a two-hour exam and consists of 60-70 questions. It is a comprehensive exam that tests an individual's knowledge and skills in a variety of areas related to Cisco collaboration technologies. 350-801 exam is computer-based and is administered at Pearson VUE testing centers around the world.
Cisco 350-801 exam is a part of the CCNP Collaboration certification track. Implementing and Operating Cisco Collaboration Core Technologies certification is designed to validate the skills and knowledge required to implement and operate Cisco collaboration solutions. Implementing and Operating Cisco Collaboration Core Technologies certification program covers a wide range of topics, including infrastructure, protocols, endpoints, and applications. The CCNP Collaboration certification is a must-have for professionals who want to advance their careers in the field of collaboration technologies.
Achive your Success with Latest Cisco 350-801 Exam: https://www.lead1pass.com/Cisco/350-801-practice-exam-dumps.html
The 350-801 Exam Test For Brief Preparation: https://drive.google.com/open?id=1HTmKLrO2OX4AvyHwkXwaTO-n6OnmSjag