The Best D-PSC-MN-01 Exam Study Material and Preparation Test Question Dumps
Get Ready to Pass the D-PSC-MN-01 exam Right Now Using Our Dell Storage Exam Package
NEW QUESTION # 42
Which of the following are critical steps when replacing a PowerScale node's motherboard? (Select two)
- A. Configuring the BIOS settings according to cluster requirements
- B. Updating the node's firmware to the latest version
- C. Performing a full system backup
- D. Verifying network port configurations
Answer: A,B
NEW QUESTION # 43
Which of the following tasks is crucial when installing a new FRU in a PowerScale node?
- A. Validating the compatibility of the FRU with the node
- B. Configuring network settings
- C. Assigning a static IP address to the FRU
- D. Creating a backup of the node's configuration
Answer: A
NEW QUESTION # 44
Refer to the exhibit.
A platform engineer has connected power cables to a Dell PowerScale Gen 6 node.
What do the status lights indicate?
- A. Not functioning
- B. Cold and redundant
- C. Warning event
- D. On and healthy
Answer: C
NEW QUESTION # 45
What phrase describes A-Series nodes?
- A. Designed for data archival purposes and can be combined with new or existing all-flash and hybrid storage systems
- B. Hybrid storage platforms that are highly flexible and provide support for a broad range of enterprise file workloads
- C. All-flash, versatile, hybrid platforms ideal for organizations that support a broad range of data archives on a single platform
- D. All-flash arrays for ultra compute and high-capacity requirements that can accomplish 250-300k protocol operations per chassis
Answer: A
NEW QUESTION # 46
When preparing a site for PowerScale installation, which of the following considerations are crucial?
(Select two)
- A. Ensuring that the flooring is anti-static
- B. Verifying environmental controls are within recommended parameters
- C. Preparing an emergency evacuation plan specific to the data center
- D. Confirming that data center staff are trained on PowerScale hardware
Answer: A,B
NEW QUESTION # 47
A platform engineer is installing a Dell PowerScale cluster with 12 F200 nodes. They are using breakout cables.
What is the speed of the back-end port of the nodes if the switchport is 100 GbE?
- A. 10 GbE
- B. 50 GbE
- C. 25 GbE
- D. 12.5 GbE
Answer: C
NEW QUESTION # 48
Match each Dell PowerScale node to its description.
Answer:
Explanation:
NEW QUESTION # 49
What actions are required to prepare the installation site regarding power requirements? (Select two)
- A. Confirming the electrical outlets meet the necessary power specifications
- B. Providing dedicated circuits for each node
- C. Ensuring proper grounding is available
- D. Installing backup power solutions, such as UPS
Answer: A,C
NEW QUESTION # 50
Which tools are used for managing a PowerScale cluster? (Select two)
- A. PAPI
- B. SNMP Manager
- C. WebUI
- D. CLI
Answer: C,D
NEW QUESTION # 51
In the context of PowerScale, what is the purpose of the SRS tool?
- A. To provide remote support and diagnostic capabilities
- B. To simulate cluster workloads for capacity planning
- C. To manage Hadoop data workflows
- D. To enforce data retention policies
Answer: A
NEW QUESTION # 52
What considerations should be made when applying upgrades or patches to a PowerScale cluster?
- A. Ensuring compatibility with existing applications
- B. All of the above
- C. Backing up configuration and data
- D. Verifying the integrity of the upgrade package
Answer: B
NEW QUESTION # 53
When reimaging a node in the context of PowerScale, what is the primary goal?
- A. To restore the node's original factory settings
- B. To update the node's BIOS settings
- C. To install a new operating system version
- D. To ensure the node's firmware is up to date
Answer: C
NEW QUESTION # 54
Which of the following are necessary actions when initializing a new PowerScale cluster? (Select two)
- A. Configuring the cluster's NTP settings
- B. Selecting the appropriate data layout scheme
- C. Defining network segregation policies
- D. Implementing role-based access control
Answer: A,B
NEW QUESTION # 55
A platform engineer is unable to join a Dell PowerScale node to an existing SmartLock compliance mode cluster.
What is the reason for this issue?
- A. Node is a Gen 6 node, which is not compatible with compliance mode.
- B. Node was not rebooted into compliance mode before trying to join.
- C. OneFS version of the existing cluster is 6.
- D. Node is an F-series node, which is not compatible with compliance mode.
Answer: B
NEW QUESTION # 56
What is the best practice for managing versioning and patches in a PowerScale cluster?
- A. Regularly reviewing available updates for compatibility
- B. Testing updates in a non-production environment
- C. Maintaining a consistent patch level across all nodes
- D. Applying patches during off-peak hours to minimize impact
Answer: C
NEW QUESTION # 57
In a Dell PowerScale Gen 6 cluster, which nodes work as a pair?
- A. Nodes in slots 2 and 4
- B. Nodes in slots 1 and 3
- C. Nodes in slots 1 and 2
- D. Nodes in slots 2 and 3
Answer: C
NEW QUESTION # 58
During the PowerScale hardware installation, why is it important to follow a structured cabling approach?
- A. To optimize air flow within the rack
- B. To reduce electromagnetic interference
- C. To facilitate future hardware upgrades and maintenance
- D. To comply with industry cabling standards
Answer: C
NEW QUESTION # 59
In the context of PowerScale, what is the primary function of the PAPI tool?
- A. To assist in hardware diagnostics
- B. To provide physical console access
- C. To enable programmatic cluster management
- D. To facilitate network configuration
Answer: C
NEW QUESTION # 60
......
Get Special Discount Offer of D-PSC-MN-01 Certification Exam Sample Questions and Answers: https://www.lead1pass.com/EMC/D-PSC-MN-01-practice-exam-dumps.html
Enhance Your Career With Available Preparation Guide for D-PSC-MN-01 Exam: https://drive.google.com/open?id=1nqzoAGZaBpaWI51LkdBuA0-TaJjlli89