[Q66-Q87] Attested NGFW-Engineer Dumps PDF Resource [2026]

Share

Attested NGFW-Engineer Dumps PDF Resource [2026]

Latest NGFW-Engineer Actual Free Exam Questions Updated 127 Questions

NEW QUESTION # 66
Which two services are configured by applying an SSL/TLS service profile? (Choose two.)

  • A. Log forwarding to Strata Logging Service
  • B. Syslog server monitoring
  • C. Forward-Trust certificate
  • D. Global Protect portal

Answer: B,D

Explanation:
An SSL/TLS service profile defines the certificate and TLS settings used by firewall services that terminate SSL/TLS connections, including the GlobalProtect portal for secure client connections and Syslog server communication when syslog is configured to use SSL/TLS for secure log transport.


NEW QUESTION # 67
Which zone type allows traffic between zones in different virtual systems (VSYS), without the traffic leaving the firewall?

  • A. Transient
  • B. External
  • C. Internal
  • D. Isolated

Answer: A

Explanation:
The Transient zone type is used to allow traffic between zones in different virtual systems (VSYS) on a Palo Alto Networks firewall without the traffic leaving the firewall. It provides a way for virtual systems to communicate with each other by acting as a temporary or intermediary zone. Traffic can pass through the firewall between the virtual systems without requiring physical interfaces or leaving the device.


NEW QUESTION # 68
In a Palo Alto Networks environment, GlobalProtect has been enabled using certificate-based authentication for both users and devices. To ensure proper validation of certificates, one or more certificate profiles are configured.
What function do certificate profiles serve in this context?

  • A. They store private keys for users and devices, effectively allowing the firewall to issue or reissue certificates if the primary Certificate Authority (CA) becomes unavailable, providing a built-in fallback CA to maintain continuous certificate issuance and authentication.
  • B. They allow the firewall to bypass certificate validation entirely, focusing only on username / password- based authentication.
  • C. They provide a one-click mechanism to distribute certificates to all endpoints without relying on external enrollment methods.
  • D. They define trust anchors (root / intermediate Certificate Authorities (CAs)), specify revocation checks (CRL/OCSP), and map certificate attributes (e.g., CN) for user or device authentication.

Answer: D

Explanation:
Basic Concept: Certificate profiles define how PAN-OS validates client certificates for services such as GlobalProtect, Authentication Portal, and administrator access. They identify trusted CAs and revocation validation methods.
Why B is Correct: The profile must contain the root/intermediate trust chain, CRL or OCSP checks, and username/device attribute mapping so certificates can be trusted and tied to the correct identity.
Why A is Wrong: Certificate profiles do not store private keys for users or act as a fallback CA. They validate certificates against trusted CAs and revocation settings.
Why C is Wrong: Certificate profiles do the opposite of bypassing validation; they define how validation is performed.
Why D is Wrong: Certificate distribution is handled by enrollment tools such as SCEP, MDM, or Group Policy, not by certificate profiles.


NEW QUESTION # 69
An administrator is troubleshooting a newly configured site-to-site VPN between a PAN-OS firewall and a third-party policy-based VPN gateway. The tunnel allows traffic between the first pair of configured subnets, but traffic to a newly added remote subnet is failing. The administrator has confirmed that routing and Security policies are correct.
What is the most likely cause of this issue?

  • A. The tunnel's maximum transmission unit (MTU) size must be increased to accommodate the new traffic.
  • B. The new local and remote subnets are missing from the Proxy ID configuration.
  • C. The Security policy for the new subnet must be placed above the existing VPN policy.
  • D. A static route for the new subnet pointing to the tunnel interface is missing.

Answer: B

Explanation:
Basic Concept: Policy-based VPN peers require each encryption domain pair to be represented in Proxy ID selectors. Adding a subnet requires adding the matching selector.
Why C is Correct: The most likely cause is that the new local/remote subnet pair is missing from Proxy ID configuration even though route and Security policy are correct.
Why A is Wrong: A static route may be needed for route-based VPN reachability, but the scenario says routing is correct and only the newly added subnet pair fails.
Why B is Wrong: Moving the Security policy would matter if the traffic were matching the wrong rule, but the scenario states that Security policy is already correct.
Why D is Wrong: MTU problems usually affect packet size and fragmentation behavior, not only a newly added policy-based VPN subnet selector.


NEW QUESTION # 70
Which zone type allows traffic between zones in different virtual systems (VSYS), without the traffic leaving the firewall?

  • A. Internal
  • B. Transient
  • C. External
  • D. Isolated

Answer: C

Explanation:
Basic Concept: Traffic between zones in different virtual systems requires a special zone type because no physical interface is crossed. PAN-OS uses external zones for this purpose.
Why C is Correct: External is correct because it represents the logical handoff between VSYS instances while traffic remains inside the firewall.
Why A is Wrong: Isolated mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.
Why B is Wrong: Transient mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.
Why D is Wrong: Internal mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.


NEW QUESTION # 71
An engineer is configuring a GlobalProtect portal and wants to enable split tunneling. The requirement is to route DNS queries for "https://www.google.com/search?q=corp.internal.com" to the DNS servers assigned by the VPN, while allowing all other DNS queries to be resolved by the client's locally configured DNS.
What is the effect of configuring this split DNS policy?

  • A. It creates a DNS proxy on the client endpoint that forwards all queries to the firewall for inspection.
  • B. It forces all applications to use the corporate DNS servers, regardless of the split tunnel settings for IP traffic.
  • C. It blocks access to all domains that are not explicitly listed in the split tunnel configuration.
  • D. It provides selective DNS resolution, with specified domains resolved through the tunnel, optimizing performance for other lookups.

Answer: D

Explanation:
Basic Concept: Split DNS lets GlobalProtect resolve selected domains through VPN DNS while leaving other names to local DNS. This improves performance without breaking internal name resolution.
Why A is Correct: The policy selectively resolves listed corporate domains through the tunnel and leaves all other lookups local.
Why B is Wrong: It blocks access to all domains that are not explicitly listed in the split tunnel configuration.
relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.
Why C is Wrong: It forces all applications to use the corporate DNS servers, regardless of the split tunnel settings for IP traffic. relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.
Why D is Wrong: It creates a DNS proxy on the client endpoint that forwards all queries to the firewall for inspection. relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.


NEW QUESTION # 72
Palo Alto Networks NGFWs use SSL/TLS profiles to secure which two types of connections?
(Choose two.)

  • A. GlobalProtect Portal
  • B. GlobalProtect Gateways
  • C. User Authentication
  • D. NAT tables

Answer: A,B

Explanation:
Palo Alto Networks Next-Generation Firewalls (NGFWs) use SSL/TLS profiles to secure connections for services such as GlobalProtect Gateways and GlobalProtect Portals. These profiles are used to manage the SSL/TLS encryption and decryption for secure communication between the firewall and clients (such as VPN clients for GlobalProtect). This helps ensure the confidentiality and integrity of the data during transmission.


NEW QUESTION # 73
A network architect is planning the deployment of a new IPSec VPN tunnel to connect a local data center to a cloud environment. The plan must include all necessary Security policy configurations for both tunnel negotiation and data transit.
Which two Security policy requirements must be included in the implementation plan? (Choose two answers)

  • A. The default interzone-default security policy is sufficient to allow the tunnel negotiation traffic between the firewall and the remote peer.
  • B. A policy must explicitly permit only the IKE application between the external-facing zone and local zone.
  • C. A policy must explicitly permit the IPSec container application between the external-facing zone and local zone.
  • D. A pair of policies is required to control the flow of data traffic into and out of the security zone assigned to the tunnel interface.

Answer: C,D

Explanation:
Basic Concept: IPSec implementation planning must include Security policy for tunnel establishment and for decrypted data traffic through the tunnel zone.
Why B and D are Correct: A data-policy pair is required for flows through the tunnel zone, and a policy must permit the IPSec container application to the firewall/local endpoint.
Why A is Wrong: The default interzone-default security policy is sufficient to allow the tunnel negotiation traffic between the firewall and the remote peer. relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.
Why C is Wrong: A policy must explicitly permit only the IKE application between the external-facing zone and local zone. relates to VPN configuration, but it does not address the specific PAN-OS requirement for selectors, tunnel interface functions, routing, or Security policy in this scenario.


NEW QUESTION # 74
Which interface types should be used to configure link monitoring for a high availability (HA) deployment on a Palo Alto Networks NGFW?

  • A. HA, Virtual Wire, and Layer 2
  • B. Virtual Wire, Layer 2, and Layer 3
  • C. HA, Layer 2. and Layer 3
  • D. Tap, Virtual Wire, and Layer 3

Answer: B

Explanation:
When configuring link monitoring for high availability (HA) on a Palo Alto Networks NGFW, the following interface types are supported:
Virtual Wire: Used when you have a transparent mode firewall deployment, where the firewall operates at Layer 2 to monitor traffic between two network segments.
Layer 2: Also used in transparent mode, where the firewall operates as a Layer 2 device and can be configured for link monitoring.
Layer 3: Used in routed mode, where the firewall is involved in routing traffic and can also be configured to monitor links.


NEW QUESTION # 75
Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

  • A. Set passive link state to "Auto."
  • B. Set "Enable in HA Passive State."
  • C. Set Transmission Rate to "fast."
  • D. Set LACP mode to "Active."

Answer: D

Explanation:
On a Palo Alto Networks firewall, LACP pre-negotiation means the interface actively sends LACP packets to negotiate the aggregate link instead of waiting for the peer.
LACP mode = Active → The device initiates LACP negotiations by sending LACP PDUs.
LACP mode = Passive → The device waits for the peer to initiate, so no pre-negotiation occurs.


NEW QUESTION # 76
When considering the various methods for User-ID to learn user-to-IP address mappings, which source is considered the most accurate due to the mapping being explicitly created through an authentication event directly with the firewall?

  • A. GlobalProtect
  • B. Server monitoring
  • C. X-Forwarded-For (XFF) headers
  • D. Authentication Portal

Answer: D

Explanation:
Authentication Portal creates user-to-IP mappings through a direct authentication interaction between the user and the firewall, making the identity association explicit, immediate, and highly accurate compared to inferred or log-based mapping methods.


NEW QUESTION # 77
Which statement applies to Log Collector Groups?

  • A. Log redundancy is available only if each Log Collector has the same amount of total disk storage.
  • B. In any single Collector Group, all the Log Collectors must run on the same Panorama model.
  • C. Enabling redundancy increases the log processing traffic in a Collector Group by 50%.
  • D. The maximum number of Log Collectors in a Log Collector Group is 18 plus two hot spares.

Answer: D

Explanation:
The maximum number of Log Collectors that can be added to a Log Collector Group is 18 plus 2 hot spares, ensuring redundancy and availability in case of failure. This allows for a total of up to
20 Log Collectors in a group, providing sufficient scalability and reliability for log collection.


NEW QUESTION # 78
What is the correct sequence of evaluation for Security policy rulebases?

  • A. Panorama Shared Rules --> Local Firewall Rules --> Device Group Rules
  • B. Panorama Post-Rules --> Panorama Pre-Rules --> Local Firewall Rules
  • C. Panorama Pre-Rules --> Local Firewall Rules --> Panorama Post-Rules
  • D. Local Firewall Rules --> Panorama Pre-Rules --> Panorama Post-Rules

Answer: C

Explanation:
Security policy rules are evaluated in a strict top-down order starting with Panorama Pre-Rules, followed by the local firewall rulebase, and finally Panorama Post-Rules, ensuring centrally enforced policies are applied before and after locally defined rules.


NEW QUESTION # 79
What are the phases of the Palo Alto Networks AI Runtime Security: Network Intercept solution?

  • A. Profiling, Policy Generation, Enforcement, Reporting
  • B. Discovery, Deployment, Detection, Prevention
  • C. Policy Generation, Discovery, Enforcement, Logging
  • D. Scanning, Isolation, Whitelisting, Logging

Answer: B

Explanation:
The phases of the Palo Alto Networks AI Runtime Security: Network Intercept solution are designed to help identify and protect against potential threats in real time by using AI to detect and prevent malicious activities within the network.
Discovery: Identifying applications, services, and behaviors within the network to understand baseline activity.
Deployment: Implementing the solution into the network and integrating with existing security measures.
Detection: Monitoring traffic and activities to identify abnormal or malicious behavior.
Prevention: Taking action to stop threats once detected, such as blocking malicious traffic or stopping exploit attempts.


NEW QUESTION # 80
An administrator is configuring dynamic updates on a Palo Alto Networks firewall that protects a hospital's patient record system. The primary concern is ensuring maximum stability and avoiding any service disruption from a potentially problematic content update.
To align with Palo Alto Networks best practices for such environments, which threshold should the administrator set for content updates?

  • A. 0 hours
  • B. 48 hours
  • C. 12 hours
  • D. 24 hours

Answer: B

Explanation:
For highly sensitive and mission-critical environments such as healthcare systems, Palo Alto Networks best practices recommend using a longer content update threshold to allow sufficient soak time for new updates, reducing the risk of instability or service disruption caused by newly released content.


NEW QUESTION # 81
An administrator needs to perform several maintenance tasks on a managed firewall directly from the Panorama console, without using the Context Switch feature.
Which set of tasks can the administrator fully execute from the Panorama UI? (Choose one answer)

  • A. Modify the IP address of a Layer 3 interface. Configure a new local administrator account. Edit a pre- rule.
  • B. Edit a post-rule. Create a new certificate profile. Configure the firewall's hostname.
  • C. Download and install a new content update. View current firewall session details. Initiate a device reboot.
  • D. Create a new zone. Configure a new virtual router. View the local ACC on the firewall.

Answer: B

Explanation:
Basic Concept: Panorama supports central configuration tasks without context switch. Operational actions that query live device state or configure local runtime views require firewall context.
Why C is Correct: Editing a post-rule, creating a certificate profile, and configuring hostname are Panorama- managed tasks available from the Panorama UI.
Why A is Wrong: Download and install a new content update. View current firewall session details. Initiate a device reboot. is related to management or logging, but it does not provide the required Panorama operation, rule hierarchy behavior, or dual-log forwarding outcome.
Why B is Wrong: Create a new zone. Configure a new virtual router. View the local ACC on the firewall. is related to management or logging, but it does not provide the required Panorama operation, rule hierarchy behavior, or dual-log forwarding outcome.
Why D is Wrong: Modify the IP address of a Layer 3 interface. Configure a new local administrator account.
Edit a pre-rule. is related to management or logging, but it does not provide the required Panorama operation, rule hierarchy behavior, or dual-log forwarding outcome.


NEW QUESTION # 82
Which configuration in the LACP tab will enable pre-negotiation for an Aggregate Ethernet (AE) interface on a Palo Alto Networks high availability (HA) active/passive pair?

  • A. Set LACP mode to "Active."
  • B. Set passive link state to "Auto."
  • C. Set Transmission Rate to "fast."
  • D. Set "Enable in HA Passive State."

Answer: D

Explanation:
Basic Concept: In active/passive HA with aggregate Ethernet, LACP pre-negotiation allows the passive unit to maintain LACP state with the switch before failover.
Why C is Correct: Enable in HA Passive State is correct because it lets the passive firewall participate in LACP, reducing convergence delay when it becomes active.
Why A is Wrong: Set Transmission Rate to "fast." is an HA-related setting or behavior, but it is not the specific HA link, LACP pre-negotiation option, or upgrade sequence required here.
Why B is Wrong: Set passive link state to "Auto." is an HA-related setting or behavior, but it is not the specific HA link, LACP pre-negotiation option, or upgrade sequence required here.
Why D is Wrong: Set LACP mode to "Active." is an HA-related setting or behavior, but it is not the specific HA link, LACP pre-negotiation option, or upgrade sequence required here.


NEW QUESTION # 83
Which two statements describe an external zone in the context of virtual systems (VSYS) on a Palo Alto Networks firewall? (Choose two.)

  • A. It is a security object associated with a specific virtual router of a VSYS.
  • B. It is associated with an interface within a VSYS of a firewall.
  • C. It is a security object associated with a specific VSYS.
  • D. It is not associated with an interface; it is associated with a VSYS itself.

Answer: C,D

Explanation:
Basic Concept: An external zone is a special VSYS security object used for traffic between virtual systems without leaving the firewall. It is not bound to an interface.
Why C and D are Correct: External zones are associated with a specific VSYS and are not interface-based, making them the correct logical boundary for inter-VSYS policy enforcement.
Why A is Wrong: It is associated with an interface within a VSYS of a firewall. mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.
Why B is Wrong: It is a security object associated with a specific virtual router of a VSYS. mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.


NEW QUESTION # 84
What are two valid zone types that can be selected from the zone configuration menu, per Palo Alto Networks best practices? (Choose two.)

  • A. Management
  • B. Layer 2
  • C. Layer 3
  • D. DMZ

Answer: B,C

Explanation:
Basic Concept: Zone type is the PAN-OS category that matches interface mode. Valid selectable zone types include Layer 2 and Layer 3, among others.
Why A and B are Correct: Layer 3 and Layer 2 are valid zone types; Management and DMZ are not PAN-OS zone types, although DMZ is often used as a zone name.
Why C is Wrong: Management is a valid Palo Alto Networks or networking concept in another context, but it does not implement the exact configuration outcome required by this question.
Why D is Wrong: DMZ is a valid Palo Alto Networks or networking concept in another context, but it does not implement the exact configuration outcome required by this question.


NEW QUESTION # 85
A Managed Security Service Provider (MSSP) is creating a new VSYS for a customer.
To prevent this customer's traffic from overwhelming the firewall's state table, which resource limit should the MSSP configure for the new VSYS?

  • A. Max Log Forwarding profiles
  • B. Max sessions
  • C. Max bandwidth
  • D. Max security profiles

Answer: B

Explanation:
Basic Concept: A VSYS shares underlying firewall resources with other tenants. Limiting sessions prevents one tenant from consuming the state table.
Why C is Correct: Max sessions is the appropriate quota for preventing a customer VSYS from exhausting session capacity.
Why A is Wrong: Max security profiles mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.
Why B is Wrong: Max bandwidth mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.
Why D is Wrong: Max Log Forwarding profiles mentions a VSYS, zone, or routing concept, but it does not satisfy the specific external-zone, visibility, or resource-control requirement for this virtual system design.


NEW QUESTION # 86
In regard to the Advanced Routing Engine (ARE), what must be enabled first when configuring a logical router on a PAN-OS firewall?

  • A. General setting
  • B. Plugin
  • C. Content update
  • D. License

Answer: A

Explanation:
The Advanced Routing Engine (ARE) requires enabling its general setting as the first step before configuring any logical routers on a PAN-OS firewall.
Configuration Steps
Access Network > Routing > General and enable Advanced Routing to activate the ARE feature set, including logical router support. Only after this can logical routers be added under Network > Routing > Logical Routers.


NEW QUESTION # 87
......

NGFW-Engineer Certification Overview Latest NGFW-Engineer PDF Dumps: https://www.lead1pass.com/Palo-Alto-Networks/NGFW-Engineer-practice-exam-dumps.html

Free NGFW-Engineer Exam Braindumps certification guide Q&A: https://drive.google.com/open?id=1haUnII7SinpkPphsKKGsoE-u46he5XJ4