L4M2 Free Update With 100% Exam Passing Guarantee [2024]
[Jan-2024] Verified CIPS Exam Dumps with L4M2 Exam Study Guide
The Chartered Institute of Procurement and Supply (CIPS) L4M2 exam, also known as Defining Business Needs, is a crucial step in the procurement process. L4M2 exam focuses on the importance of understanding the business requirements and aligning them with procurement strategies. It also covers various techniques that procurement professionals can use to identify business needs, such as conducting stakeholder analysis, business process mapping, and SWOT analysis.
NEW QUESTION # 49
Which type of specification is less time-consuming to develop?
- A. Outcome-based specification
- B. Conformance specification
- C. Technical drawings
- D. Design specification
Answer: A
Explanation:
There are two major types of specification: conformance and performance specifications. They have the following characteristics:
Since performance specification is often a list of outputs or outcomes, it usually takes less time to develop than conformance specification.
NEW QUESTION # 50
A procurement team is categorising their purchased items into four quadrants of Kraljic's supply chain portfolio matrix. They realise that there are some low-value items which come from very few suppliers in the market. The organisation is critically dependent on these suppliers. The team plans to reduce the dependence by finding alternative sources. Is this a right course of action?
- A. Yes, this action will dramatically increase the supplier's bargaining power
- B. Yes, the organisation needs to reduce the supply risks
- C. No, the organisation should run competitive biddings to exploit the competition
- D. No, there is no way to escape this dependency
Answer: B
Explanation:
According to Kraljic portfolio matrix, the low-value items with high supply risk are bottleneck items.
The purchasing strategy that is commonly recommended for these products is primarily based on acceptance of the dependence and reduction of the negative effects of the unfavourable position. An alternative strategy suggested by purchasing practitioners is to find other suppliers and move towards the non-critical quadrant.
- Accept dependence, reduce negative consequences: The main focus of this strategy is to assure supply, if necessary even at additional cost. Examples of this strategy are keeping extra stocks of the materials concerned or developing consigned stock agreements with suppliers. By performing a risk analysis firms can identify the most important bottleneck products and consider the implications. A possible action for dealing with unexpected bad dependence positions for certain products is to employ contingency planning.
- Reduce dependence and risk, find other solutions: This strategy is geared towards reducing the dependence on the supplier. The most common way to achieve this is to broaden the specifications of the product or to search for new suppliers.
The procurement team in the scenario has selected reducing dependency by finding alternatives. This is a right strategy for bottleneck item.
Reference:
- CIPS study guide page 82-84
- Purchasing strategies in the Kraljic matrix-A power and dependence perspective, Marjolein C.J. Caniels, Cees J. Gelderman LO 2, AC 2.1
NEW QUESTION # 51
Ethan is the newly appointed CEO of ATT Group. He sees that the company is wasting financial resources on unnecessary spends. To solve this problem, Ethan requires all functional managers to prepare their department budget from scratch. Each spend must have justification or it will not be approved. Which budgeting method is Ethan using?
- A. Zero-based budget
- B. Incremental budget
- C. Activity-based budget
- D. Value preposition budget
Answer: A
Explanation:
There are four common types of budgets that companies use: (1) incremental, (2) activity-based, (3) value proposition, and (4) zero-based.
Incremental budgeting takes last year's actual figures and adds or subtracts a percentage to obtain the current year's budget. It is the most common method of budgeting because it is simple and easy to understand.
Activity-based budgeting is a top-down budgeting approach that determines the amount of inputs required to support the targets or outputs set by the company. For example, a company sets an out-put target of $100 million in revenues. The company will need to first determine the activities that need to be undertaken to meet the sales target, and then find out the costs of carrying out these ac-tivities.
In value proposition budgeting, the budgeter considers the following questions:
- Why is this amount included in the budget?
- Does the item create value for customers, staff, or other stakeholders?
- Does the value of the item outweigh its cost? If not, then is there another reason why the cost is justified?
Value proposition budgeting is really a mindset about making sure that everything that is included in the budget delivers value for the business. Value proposition budgeting aims to avoid unneces-sary expenditures - although it is not as precisely aimed at that goal as our final budgeting option, zero-based budgeting.
As one of the most commonly used budgeting methods, zero-based budgeting starts with the as-sumption that all department budgets are zero and must be rebuilt from scratch. Managers must be able to justify every single expense. No expenditures are automatically "okayed". Zero-based budgeting is very tight, aiming to avoid any and all expenditures that are not considered absolutely essential to the company's successful (profitable) operation. This kind of bottom-up budgeting can be a highly effective way to "shake things up". This is the method used in the scenario.
Reference:
- CIPS study guide page 58
- Types of Budgets - The Four Most Common Budgeting Methods (corporatefinanceinstitute.com) LO 1, AC 1.4
NEW QUESTION # 52
When should procurement professional tolerate a risk?
- A. When the risk may disrupt the production
- B. When the risk causes some trivial annoyance
- C. When the risk breaks the relationship with the strategic supplier
- D. When the risk imposes an existential threat
Answer: B
Explanation:
Risk control is the process by which an organization reduces the likelihood of a risk event occurring or mitigates the effects that risk should it occur. Our preferred way to determine your risk control strategy is to use the four T's Process:
Transferring Risk can be achieved through the use of various forms of insurance, or the payment to third parties who are prepared to take the risk on behalf of the organization Tolerating Risk is where no action is taken to mitigate or reduce a risk. This may be because the cost of instituting risk reduction or mitigation activity is not cost-effective or the risks of impact are at so low that they are deemed acceptable to the business (such as some trivial annoyance). Even when these risks are tolerated they should be monitored because future changes may make it no longer tolerable.
Treating Risk is a method of controlling risk through actions that reduce the likelihood of the risk occurring or minimize its impact prior to its occurrence. Also, there are contingent measures that can be developed to reduce the impact of an event once it has occurred.
Terminating Risk is the simplest and most often ignored method of dealing with risk. It is the ap-proach that should be most favored where possible and simply involves risk elimination. This can be done by altering an inherently risky process or practice to remove the risk. The same can be used when reviewing practices and processes in all areas of the business.
If an item presents a risk and can be changed or removed without it materially affecting the busi-ness, then removing the risk should be the first option considered; rather than attempting the treat, tolerate or transfer it.
Reference:
LO 3, AC 3.3
NEW QUESTION # 53
A procurement manager is discussing with other stakeholders about the scope and the implementation of the upcoming construction project. A stakeholder argues that the construction projects are often risky as the overall scope of the work can't be accurately estimated from the beginning. Furthermore, the project spans over a long period, the costs of materials can fluctuate widely. The procurement manager suggests that the pricing structure should be able to cover the supplier's costs plus 10% markup on total costs. This arrangement is known as...?
- A. Cost-plus award fee
- B. Cost-plus Fixed percentage
- C. Cost-plus incentive fee contracts
- D. Cost-plus fixed-fee
Answer: B
Explanation:
As you can see from the scenario, the procurement manager is suggesting to use cost plus pricing arrangement.
A cost-plus contract is an agreement to reimburse a company for expenses incurred plus a specific amount of profit, usually stated as a percentage of the contract's full price. These type of contracts are primarily used in construction where the buyer assumes some of the risk but also provides a degree of flexibility to the contractor.
Cost-plus contracts can be separated into four categories. They each allow for the reimbursement of costs as well as an additional amount for profit:
1. Cost-plus award fee contracts allow the contractor to be awarded a fee usually for good per-formance.
2. Cost-plus fixed-fee contracts cover both direct and indirect costs, in addition to a fixed fee.
3. Cost-plus incentive fee contracts happen when the contractor is given a fee if his or her perfor-mance meets or exceeds expectations.
4. Cost-plus percent-of-cost contracts allow the amount of reimbursement to rise if the contrac-tor's costs rise.
In the scenario, the procurement manager suggests a pricing structure that covers supplier's costs and adds 10% markup. This is cost-plus fixed-percentage.
Reference:
- Cost-Plus Contract Definition (investopedia.com)
- CIPS study guide page 30-36
LO 1, AC 1.2
NEW QUESTION # 54
Which of the following are most likely to increase the buyer's bargaining power?
1. Buyers are price sensitive
2. High set-up cost for new entrants
3. Threat of forward integration is high
4. Threat of backward integration is significant
- A. 2 and 3 only
- B. 2 and 4 only
- C. 3 and 4 only
- D. 1 and 4 only
Answer: D
Explanation:
Price sensitivity is the degree to which the price of a product affects consumers' purchasing behaviours. Buyer power will be stronger if buying organisation are price sensitive and vice versa.
Backward integration is a form of vertical integration in which a buying organisation expands its role to fulfil tasks formerly completed by businesses up the supply chain. Buyer power is strong if threat of backward integration is high.
Set-up cost is a determinant of threat of new entry. Some industries require very expensive assets in order to make products. The financial risk of entering the industry and not succeeding can deter many potential new entrants. The fewer new entrants, the fewer available substitutes, then the bar-gaining power of buyer can be negatively affected.
Forward integration is a business strategy that involves a form of vertical integration whereby business activities are expanded to include control of the direct distribution or supply of a compa-ny's products. Threat of forward integration is a determinant of supplier's bargaining power.
Reference:
LO 2, AC 2.2
NEW QUESTION # 55
Which of the following might be the consequences of under-specification? Select TWO that apply:
- A. Additional cost to rework
- B. Poor competition between suppliers
- C. Unfit products or services
- D. Few suppliers can supply the full range of features
- E. Higher cost due to inessential features
Answer: A,C
Explanation:
Main risks involved in an under-specified requirement
* The product or service is not fit for use since it does not match the actual needs
* Higher cost due to corrections or reworks (proposal evaluations, scope or work monitoring, change in insulation materials or systems, reduced productivity, etc.).
* Higher operating cost on many fronts: process control, energy consumption, maintenance, etc.
* Other problems like corrosion under insulation, mold development, safety-related concerns, etc.
LO 3, AC 3.3
NEW QUESTION # 56
OMK is a Russian steel firm that is expanding market abroad. It plans to build a steel plant in a foreign country. Due to intricate technical requirements, the plant design will be very complex. Procurement department or technical department alone cannot draft the specification. OMK senior management decides that this task must be treated as a project. Which of the following should be done before writing the specification for new steel plant?
- A. Draft the terms and conditions for plant construction contract
- B. Develop the performance framework for the supplier
- C. Develop project initial document
- D. Invite suppliers to the tendering process
Answer: C
Explanation:
The writing of a complex specification should be treated as a project because it requires the brain power from different stakeholders. Many tools and processes of project management can be applied to complex specification development. Before engaging with the stakeholders and implementing the project, the project initial document should developed.
A Project Initiation Document (PID) is one of the most important components of project manage-ment, which forms the foundation for a company project. It is a reference point during the entire project, for the client as well as for the project team.
A PID bundles documentation into a logical reference work that collects all important information needed to start and run a project from a good foundation. After that, Project Initiation Document must be transferred to all stakeholders, including business sponsors.
This forms the basis for the project management. The documentation from which the PID is com-posed include the business case in which the project's justification can be found, the communica-tion plan and the project plan.
The PID is composed out of collected information and includes, among others, the following com-ponents:
- Project goal(s); what do you want to achieve with the project?
- Project size; how large is the project, how long does it take and how many people are involved?
- Project organisation; who are involved in the project, what are their tasks, responsibilities and authority?
- Limits and risks; what can cause a project to stagnate and are there risks related to the project?
- Stakeholders; who has a stake in the success of the project?
- Project checks and frame reporting; by carefully taking into account evaluation moments, it is clear to everyone what sample tests can be carried out during the process.
In addition, it is important that the Project Initiation Document also contains the following infor-mation:
- The background and occasion of the project, which together provide information about the con-text.
- The project organisational structure, which describes who has which management responsibility in the project.
- The project quality plan, describing who controls the quality of the products to be delivered and how it will take place.
- The total project planning, including the duration of all activities.
- The exception process, which describes how exceptions are dealt with and the steps of the escalation procedure.
- The risk log, including the measures that will be taken when there are unforeseen risks.
- The documentation structure of the project, in which the encoding and storage of all documents and products to be provided by the project has been recorded in advance.
Reference:
- CIPS study guide page 148
- Project Initiation Document (PID), a project management tool | ToolsHero LO 3, AC 3.3
NEW QUESTION # 57
A company buys components from its supplier. However, the supplier has not sent the invoice to the buyer and the buyer will not pay until next month. How will that amount of money be shown in the financial statements of the buying organization?
- A. Accrued interest
- B. Accrued expense
- C. Tax liabilities
- D. Accounts payable
Answer: B
Explanation:
The buyer won't pay the supplier until next month. This is a liability to the buyer. This amount can be recorded as accrued expense or accounts payable. On the other hand, the supplier has not sent the invoice, so it should be accrued expense.
Both accounts payables and accrued expenses are liabilities. Accounts payable is the total amount of short-term obligations or debt a company has to pay to its creditors for goods or services bought on credit. With accounts payables, the vendor's or supplier's invoices have been received and recorded.
On the other hand, accrued expenses are the total liability that is payable for goods and services that have been consumed by the company or received. However, accrued expenses are those bills in which an invoice or bill has not yet been received. As a result, accrued expenses can sometimes be an estimated amount of what's owed, which is adjusted later to the exact amount, once the invoice has been received.
Conversely, accounts payable should represent the exact amount of the total owed from all of the invoices received.
Reference:
- CIPS study guide page 55-56
- Understanding Accrued Expenses vs. Accounts Payable (investopedia.com) LO 1, AC 1.4
NEW QUESTION # 58
Which of the following is an useful tool for value engineering?
- A. Kraljic Portfolio Matrix
- B. Kano model
- C. SAMOA
- D. Star-burst method
Answer: B
Explanation:
Value Engineering (VE) is concerned with new products. It is applied during product development. The focus is on reducing costs, improving function or both, by way of teamwork-based product evaluation and analysis. This takes place before any capital is invested in tooling, plant or equipment.
This is very significant, because according to many reports, up to 80% of a product's costs (throughout the rest of its life-cycle), are locked in at the design development stage. This is under-standable when you consider the design of any product determines many factors, such as tooling, plant and equipment, labour and skills, training costs, materials, shipping, installation, maintenance, as well as decommissioning and recycle costs.
The Kano model is a theory for product development and customer satisfaction developed in the 1980s by Professor Noriaki Kano, which classifies customer preferences into five categories. Both Kano model and Value Engineering aims at optimising new product, so they can be combined to-gether. CIPS L4M2 study guide consider Kano model is a tool of Value Engineering
Example of Kano model (source: Wikipedia)
Reference:
LO 3, AC 3.4
NEW QUESTION # 59
A buying organisation may not have technical capability to produce a highly complex specification. Which of the following are sources of information that can be used to create the specification? Select TWO that apply
- A. Industry standards
- B. Suppliers' know-how
- C. Constitution
- D. Name cards
- E. Standard terms and conditions
Answer: A,B
Explanation:
If an organisation doesn't have capability to produce a technical specification, they can draft one based on standards or consulting the suppliers.
Reference:
LO 3, AC 3.1
NEW QUESTION # 60
Robert is a senior buyer at MMC Construction Ltd. His company is doing multiple development projects in the country, which increases procurement workload significantly. Meanwhile, most of the tasks are handled manually, which causes bottlenecks in the workflows. The procurement team is overwhelmed by the workload and complains from other departments. From previous experience, Robert knows that electronic system may help his procurement team. He writes a business case to submit to the senior management, in which he insists on the possible productivity improvement by adopting e-system in procurement. Is Robert's action reasonable?
- A. Yes, productivity improvement is a mandatory element in every business case
- B. No, there's no need to make a business case for new purchase
- C. No, adopting e-system may make procurement department jobless
- D. Yes, his reason may appeal the senior management
Answer: D
Explanation:
Composing a compelling business case requires the proposer to write in the language of the approvers. Generally, approvers are business executives or important shareholders whose major interest is the profitability of the firm. Business case proposer may embed the following contents:
- Return on investment: according to Investopedia, Return on Investment (ROI) is a performance measure used to evaluate the efficiency of an investment or compare the efficiency of a number of different investments. ROI tries to directly measure the amount of return on a particular investment, relative to the investment's cost. A business case would seem more attractive if the proposal is expected to have high ROI.
- Time to market: Time-to-market (TTM) refers to the time from which a company initially con-ceives a product or service idea to the point when the actual product or service is accessible to buyers in the market (Afonso et al., 2008). The speed at which companies can introduce products into the market is critical for sustaining competitive advantage, and the reduction of product development cycle time has become a strategic objective for many technology-driven firms.
- Customer satisfaction: Keeping existing customer to stay in the business can affect greatly on the profit margin of a firm. A new proposal that finds the way to innovate while keeping the current customers satisfied may gain the interest of senior management.
- Improving productivity: Productivity is the measure of how efficient and effective a firm is. Im-proving the productivity means that with the same or lesser input, better output is generated. In-creasing productivity also improves the profitability of a company.
- Risk management: Any business activity contains inherent risks. For example, for a mining company to be truly responsible, it must keep all of its workers safe, healthy and motivated, meet the expectations of the local community and government for the region in which it is operating, ensure it impacts on the environment positively if at all, as well as achieve the financial objectives set by its investors for both the short and long term. Managing risks well improves the production throughput and maintains customer satisfaction.
In the scenario, Robert is trying to convince the senior management to adopt e-procurement system by insisting on potential productivity improvement. This is the right approach. A business plan should engage and please senior management and directors. An appealing business case tells them how important things to the business (such as productivity, return on investment, customer satisfaction or costs) are affected by the plan.
Reference:
LO 1, AC 1.1
NEW QUESTION # 61
XYZ Ltd is producing an engine which consists of many components. The procurement manager wants to find cost reduction opportunities and minimise part varieties. Which of the following may help her to achieve these objectives?
1. Value analysis
2. Segment analysis
3. Variety reduction
4. Standardisation
- A. 2 and 3 only
- B. 3 and 4 only
- C. 1 and 3 only
- D. 1 and 4 only
Answer: D
Explanation:
Value analysis is often defined as a systematic process for improving the value of a product, service or project. It is typically used in the following ways:
- To determine the value of each component used
- To find cost reduction opportunities by optimising the components used Segment analysis helps procurement and supply to shape and manage the supply markets.
There is no concept known as Variety reduction.
Standardisation is the process which is used to reduce varieties of products or parts.
In this scenario, the company's objective is cost reduction, then value analysis or value engineering is more likely to be applied. Also the company aims at reducing variety, standardisation can be combined with value analysis to produce the best results.
LO 3, AC 3.4
NEW QUESTION # 62
Which of the following is the core of value analysis process?
- A. Be creative
- B. Carry out functional analysis
- C. Develop
- D. Gather information
- E. Evaluate
Answer: B
Explanation:
Value Analysis (VA) is concerned with existing products. It involves a current product being ana-lysed and evaluated by a team, to reduce costs, improve product function or both. Value Analysis exercises use a plan which step-by-step, methodically evaluates the product in a range of areas. These include costs, function, alternative components and design aspects such as ease of manufac-ture and assembly.
According to the Value Methodology standard, there are 6 phases to a Value Analysis:
- Information
- Function Analysis
- Creative
- Evaluation
- Development
- Presentation
1. Information
In this first phase, the team attempts to understand why the project exists and who or what it is to produce. They obtain project data, present the original design or product concepts, and understand the project scope. Schedule, costs, budget, risk, and other non-monetary issues are studied until the team is comfortable with the concept of the project, what it is to produce, and who its end users are.
This step also includes things like site visits and meetings with the project team, if required. Project documents like plans, drawings, specifications, and reports are obtained and the value engineering team becomes familiar with them.
2. Function Analysis
This step represents the meat and potatoes (core) of the value analysis. The team attempts to determine the functions the project serves. Functions come in two forms:
- Primary functions are those that represent the reason for the project's existence, for example, a building project might have adequate plumbing as a primary function.
- Secondary functions are those that the project serves without being core to the project. For example, a building project might have as a secondary function maintaining the view of the neighboring building.
The functions are described in verb/noun pairs, such as "supply water to all suites," or "Maintain view of adjacent park." For a project like this, the team should come up with 10 - 15 functions. You might be surprised how many secondary functions exist for most projects. Subject matter experts would be a great resource, but in their absence an appropriate level of brainstorming and analysis are necessary.
The team should also identify value-mismatched functions to focus the improvements on. For ex-ample, maybe a large obstruction is preventing the view of the adjacent park from too many suites resulting in a potential mismatch of the cost vs. functional benefit. This is investigated in the next step.
3. Creative
This phase represents the generation of improvement ideas. The team develops alternative ways that the project can perform the functions that have been identified. At this step, the functions are looked at individually and each one gets a list of alternative ways to perform the function. There is no judging between the importance of the various functions.
4. Evaluation
At this stage, a priority is given to each project improvement idea. The ideas are discussed and potential costs are determined. Once the risk-reward profile of each idea is itemized, the team has determined which ideas are worth implementing into the project or feature.
A few years ago, there was a pedestrian bridge built near my home which was originally designed for emergency vehicles. Although this type of design is standard practice for the bridges of this type, the value engineering team identified that emergency vehicle passage was not needed (verb/noun pair = 'maintain passage for emergency vehicles'). Also, a second major outcome of this value analysis was to change the design to an aesthetic, curved bridge because it was in a prominent location. The redesign of the bridge cost some money but this was more than made up by the cost of the bridge construction. Thus, the value analysis paid for itself about 10 times over in the reduced construction cost, and the bridge was significantly more aesthetic.
5. Development
Once the value improvement options have been whittled down to the ones that make sense, the value engineering team develop the options to the point of passing them back to the original project team. They must be clearly written and explained so that the project owner and stakeholders can understand how it benefits the project and act on it. Any potential negative factors are identified. Potential costs and cost savings are itemized.
6. Presentation
This last phase represents the presentation of the alternatives to the stakeholders. Often value engineering represents a change in the normal practices that people are used to, an "out of the box thinking." Thus the best salesperson on the team is often the best one to do the presentation.
Some typical products of a value engineering analysis are a briefing document, risk analy-sis, present worth analysis, advantages vs. disadvantages, etc.
Reference:
LO 3, AC 3.4
NEW QUESTION # 63
Ymira is asked to develop the specification for water purifier which will be used at the company headquarter. She believes that the specification can be drafted based on the information available on the Internet, such as blog posts, comparison websites, how-to websites, life hacks, etc. Which of the following traits will make the information more useful?
- A. Promotional information
- B. Written by inexperienced author
- C. Trustworthy sources
- D. Objectivity
- E. Subjectivity
Answer: C,D
Explanation:
Internet is a great source of information, however, information from the Internet needs to be tested for accuracy and reliability. To check the information from the Internet, a buyer can use the criteria with acronym SAMOA:
Source (of the information)
Audience (intended as the recipient of the information)
Methodology (used to collect and analyse the data)
Objectivity (of the information - there should be no bias)
Accuracy
Reference:
LO 3, AC 3.1
NEW QUESTION # 64
Which of the following are typically reasons why an organisation implements value analysis? Select TWO that apply:
- A. To provide an outline business case for the specification
- B. To decide whether there will be sufficient surplus funds to reinvest in the business
- C. To shape and manage supply market
- D. To find cost reduction opportunities by optimising the components used
- E. To determine the value of each component used
Answer: E
Explanation:
Value analysis is a systematic review of the production, purchasing and product design processes to reduce overall product costs. This can be accomplished through a variety of activities, including the following:
- Designing products to use lower-tolerance parts that are less expensive
- Switching to lower-cost components
- Standardizing parts across product platforms in order to achieve volume discounts
- Altering production processes to minimize the amount of production cycle time, thereby reducing labor costs
- Introducing automation to strip labor costs out of the production process
- Altering product packaging to lower its cost while still protecting the product The process is not a wholesale attack on costs. Costs are only reduced when the result will not im-pact the perceived level of quality experienced by customers, or the level of customer satisfaction.
Reference:
LO 3, AC 3.4
NEW QUESTION # 65
Which of the following are considered as direct costs in a construction company? Select TWO op-tions
- A. The materials and supplies needed for the company's day-to-day operations.
- B. Clerical assistants who maintain the office
- C. An employee is hired to work on a project, either exclusively or for an assigned number of hours
- D. Raw materials
- E. Advertising and marketing communication
Answer: C,D
Explanation:
Direct costs are directly associated with the production of a good or service. In this question, 'An employee is hired to work on a project, either exclusively or for an assigned number of hours' and 'Raw materials' are directly related to producing the product.
Indirect costs are the general costs of the organisation - these costs cannot easily be attributed to specific products or services (also known as overheads). 'The materials and supplies needed for the company's day-to-day operations' or 'Clerical assistants who maintain the office' or 'Advertising and marketing communication' is example of indirect cost.
Reference:
LO 1, AC 1.2
NEW QUESTION # 66
......
The CIPS L4M2 exam covers a broad range of topics related to defining business needs, including understanding the strategic context, conducting market research, developing a business case, and evaluating options. By passing the CIPS L4M2 exam, professionals can demonstrate their ability to analyze complex business needs and develop procurement strategies that are effective and efficient. Defining Business Needs certification is also an excellent way to boost one's reputation in the industry and prove their commitment to ongoing professional development.
Authentic Best resources for L4M2 Online Practice Exam: https://www.lead1pass.com/CIPS/L4M2-practice-exam-dumps.html
L4M2 Test Engine Practice Exam: https://drive.google.com/open?id=1B0KnkOjM-GFhYHY-dn2fuM_y1_7S3XYP