Free NSE6_FAZ-7.2 Exam Files Downloaded Instantly UPDATED [2024]
100% Pass Guaranteed Free NSE6_FAZ-7.2 Exam Dumps
NEW QUESTION # 19
Which command can you use to find the IP addresses of the devices sending logs to FortiAnalyzer?
- A. diagnose dvm adorn List
- B. diagnose debug applicationoftpd 8
- C. diagnose teatapplication miglogd6
- D. diagnose bestapplicationoftpd 3
Answer: B
Explanation:
The commanddiagnose debug application oftpd 8is used to obtain detailed debug output for the OFTP (Over the FortiGate Protocol) daemon on FortiAnalyzer. This protocol is responsible for the communication and log transfer between FortiGate devices and FortiAnalyzer. By using this debug level, administrators can find information including the IP addresses of devices that are sending logs to FortiAnalyzer.References:FortiOS
7.4.1 Administration Guide, "Diagnostic commands" section.
NEW QUESTION # 20
Which two statements are true regarding the log synchronization states for HA on FortiAnalyzer? (Choose two.)
- A. By default. Log Data Sync is disabled on all backup devices.
- B. Log Data Sync provides real-time log synchronization to all backup devices.
- C. With Initial Logs Sync, when you add a unit to an HA cluster, the primary device synchronizes its logs with the backup device.
- D. When Log Data Sync is turned on, the backup device reboots and then rebuilds the log database with the synchronized logs.
Answer: B,C
Explanation:
For HA on FortiAnalyzer, Log Data Sync ensures real-time log synchronization among all cluster members, including backup devices. This feature is enabled by default. The Initial Logs Sync state is triggered when a new unit is added to an HA cluster, where the primary unit synchronizes its logs with the newly added unit.
After the initial synchronization, the secondary unit reboots and rebuilds its log database with the synchronized logs.References:FortiAnalyzer 7.2 Administrator Guide, "Log synchronization" section.
NEW QUESTION # 21
Which items must you configure on FortiAnalyzer to send its reports to an external server?
- A. Output profile
- B. Mail server
- C. Report schedule
- D. Fabric connector
Answer: A
Explanation:
To send reports from FortiAnalyzer to an external server, you must configure the output profile. This involves specifying the method (FTP, SFTP, or SCP), server IP, username, password, and the directory where the report will be saved. Additionally, you have the option to delete the report after it has been uploaded to the server.References:FortiAnalyzer 7.2 Administrator Guide, "Enable uploading of generated reports to a server" section.
NEW QUESTION # 22
Which two of the available registration methods place the device automatically in its assigned ADOM?
(Choose two.)
- A. Pre-shared key
- B. Request from the device
- C. Serial number
- D. Fabric Authorization
Answer: C,D
Explanation:
The registration methods that automatically place a device in its assigned ADOM are using the serial number and fabric authorization. When devices are added to FortiAnalyzer using these methods, they are automatically placed in the appropriate ADOM, which could be a defaultADOM based on the device type or a predefined ADOM based on the serial number or fabric authorization. This simplifies the management of devices and their logs by organizing them into their respective ADOMs from the moment they are registered.References:FortiAnalyzer 7.4.1 Administration Guide, "Default device type ADOMs" and
"Assigning devices to an ADOM" sections.
NEW QUESTION # 23
Which process caches logs on FortiGate when FortiAnalyzer is not readable?
- A. miglogd
- B. sqlplugind
- C. oftpd
- D. logfiled
Answer: D
Explanation:
The processlogfiledin FortiGate units with an SSD disk is responsible for buffering logs when FortiAnalyzer is unreachable. If the connection to FortiAnalyzer is lost and the memory log buffer is full,logfiledallows logs to be buffered on disk. These logs are then sent to FortiAnalyzer once the connection is restored. This reliable logging mechanism ensures that logs are not lost during periods when FortiAnalyzer is not reachable, thereby maintaining log integrity and continuity.References:FortiOS 7.4.1 Administration Guide, "Log Buffering" and
"Reliable Logging" sections.
NEW QUESTION # 24
Which two statements are true regarding fabric connectors? (Choose two.)
- A. Using fabric connectors is more efficient than third-party polling information from the FortiAnalyzer API
- B. The storage connector service does not require a separate license to send logs to the cloud platform.
- C. Cloud-out connectors allow you to send real-time logs to public cloud accounts like Amazon S3.
- D. Fabric connectors allow you to save storage costs and improve redundancy.
Answer: A,B
NEW QUESTION # 25
Which statement is true when you areupgrading the firmware on an HA cluster made up of throe FortiAnalyzer devices?
- A. You can perform thefirmware upgrade using only a console connection.
- B. All FortiAnalyzer devices will be upgraded at the same time.
- C. Enabling uninterruptible-upgrade prevents normal operations from being interrupted during the upgrade.
- D. First, upgrade the secondary devices, and then upgrade the primary device.
Answer: D
Explanation:
In an HA cluster, the firmware upgrade process involves upgrading the secondary devices first. This approach ensures that the primary device can continue to handle traffic and maintain the operational stability of the network while the secondary devices are being upgraded. Once the secondary devices have successfully upgraded their firmware and are operational, the primary device can then be upgraded. This method minimizes downtime and maintains network integrity during the upgrade process.
When upgrading firmware in a High Availability (HA) cluster of FortiAnalyzer units, the recommended practice is to first upgrade the secondary devices before upgrading the primary device. This approach ensures that the primary device, which coordinates the cluster's operations, remains functional for as long as possible, minimizing the impact on log collection and analysis. Once the secondary devices are successfully upgraded and operational, the primary device can be upgraded, ensuring a smooth transition and maintaining continuous operation of the cluster.References:FortiAnalyzer 7.2 Administrator Guide - "System Administration" and
"High Availability" sections.
NEW QUESTION # 26
What is the best approach to handle a hard disk failure on a FortiAnalyzer that supports hardware RAID?
- A. Run execute format disk to format and restart the FortiAnalyzer device.
- B. There is no need to do anything because the disk will self-recover.
- C. Shul down FortiAnalyzer and replace the disk.
- D. Perform a hot swap of the disk.
Answer: D
Explanation:
In systems that support hardware RAID, hot swapping allows for the replacement of a failed disk without shutting down the system. This capability is crucial for maintaining uptime and ensuring data redundancy and availability, especially in critical environments. The RAID controller rebuilds the data on the new disk using redundancy data from the other disks in the array, ensuring no data loss and minimal impact on system performance.
In the context of a FortiAnalyzer unit equipped with hardware RAID support, the optimal approach to addressing a hard disk failure is to perform a hot swap of the disk. Hardware RAID configurations are designed to provide redundancy and fault tolerance, allowing for the replacement of a failed disk without the need to shut down the system. Hot swapping enables the administrator to replace the faulty disk with a new one while the system is still running, and the RAID controller will rebuild the data on the new disk, restoring the RAID array to its fully operational state.References:FortiAnalyzer 7.2 Administrator Guide - "Hardware Maintenance" and "RAID Management" sections.
NEW QUESTION # 27
An administrator, fortinet, can view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mail server that can be used to send alert emails.
What can be the problem?
- A. fortinet is assigned Restricted_User administrative profile.
- B. A trusted host is configured.
- C. ADOM mode is configured with Advanced mode.
- D. fortinet is assigned the Standard_User administrative profile.
Answer: D
Explanation:
If the administrator "fortinet" can view logs and perform device management tasks but cannot create a mail server for alert emails, it is likely due to the administrative profile assigned to them. The Standard_User administrative profile may restrict certain administrative functions, such as creating mail servers. To perform all administrative tasks, including creating mail servers, a higher privilege profile, such as Super_Admin, might be required.References:FortiAnalyzer 7.2 Administrator Guide, "Mail Server" section.
NEW QUESTION # 28
What areanalytics logs on FortiAnalyzer?
- A. Logs that are compressed and saved to a log file
- B. Logs that roll over when the log file reaches a specific size
- C. Logs thatare indexed and stored in the SQL
- D. Logs classified as type Traffic, or type Security
Answer: C
Explanation:
On FortiAnalyzer, analytics logs refer to the logs that have been processed, indexed, and then stored in the SQL database. This process allows for efficient data retrieval and analytics. Unlike basic log storage, which might involve simple compression and storage in a file system, analytics logs in FortiAnalyzer undergo an indexing process. This enables advanced features such as quick search, report generation, and detailed analysis, making it easier for administrators to gain insights into network activities and security incidents.References:FortiAnalyzer 7.2 Administrator Guide - "Log Management" and "Data Analytics" sections.
NEW QUESTION # 29
Which statement is true about ADOMs?
- A. You can change the ADOM mode only through the GUI.
- B. In normal mode, you cannot change the disk quota of the ADOM after its creation.
- C. When a FortiAnalyzer Fabric is implemented, the default ADOM mode is set to advanced.
- D. A fabric ADOM can include all the device types supported by FortiAnalyzer.
Answer: D
Explanation:
Regarding ADOMs (Administrative Domains) in FortiAnalyzer, a fabric ADOM is capable of including all device types that FortiAnalyzer supports. This is part of the flexibility offered by ADOMs to manage and report on logs from various devices within a Fortinet security fabric. ADOMs can be enabled to support non-FortiGate devices as well, and the root ADOM in Fabric ADOMs provides visibility into all Security Fabric devices. Additionally, it should be noted that in normal mode, you cannot assign different FortiGate VDOMs to different ADOMs, while in advanced mode, you can, which provides a more granular control over the log data from individual VDOMs.References:FortiAnalyzer 7.4.1 Administration Guide, "ADOMs" and
"ADOM device modes" sections.
NEW QUESTION # 30
After you have moved a registered logging device out of one ADOM and into a new ADOM, you run the following command: execute sql-local rebuild-adom <new-ADOM-name> What is the purpose of running this CLI command?
- A. To reset the ADOM disk quota enforcement to its default value
- B. To populate the new ADOM with analytical logs for the moved device, so you can run reports
- C. To migrate the archive logs to the new ADOM
- D. To remove the analytics logs of the device from the old database
Answer: B
Explanation:
When you move a registered logging device from one ADOM (Administrative Domain) to another in FortiAnalyzer, it's essential to ensure that the analytical logs for the moved device are available in the new ADOM to maintain continuity in reporting and log analysis. The commandexecute sql-local rebuild-adom < new-ADOM-name>is used specifically for this purpose. Running this command populates the new ADOM with the analytical logs of the moved device, enabling you to generate accurate and comprehensive reports based on the historical data of the device in its new ADOM context. This process ensures that the transition of devices between ADOMs does not lead to a loss of analytical insight or reporting capabilities for the device's traffic and events.
NEW QUESTION # 31
Which two methods can you use to restrict administrative access on FortiAnalyzer? (Choose two.)
- A. Configure trusted hosts.
- B. Use administrator profiles.
- C. Fabric connectors to external LDAP servers.
- D. Limit access to specific virtual domains.
Answer: A,B
Explanation:
To restrict administrative access on FortiAnalyzer, two effective methods are using administrator profiles and configuring trusted hosts. Administrator profiles allow for defining the level of access and permissions for different administrators, controlling what each administrator can seeand do within the FortiAnalyzer unit.
Configuring trusted hosts enhances security by limiting administrative access to specified IP addresses, ensuring that administrators can only connect from approved locations or networks, thus preventing unauthorized access from outside specified subnets or IP addresses.References:FortiAnalyzer 7.4.1 Administration Guide, "Administrators" and "Trusted hosts" sections.
NEW QUESTION # 32
......
Latest NSE6_FAZ-7.2 dumps - Instant Download PDF: https://www.lead1pass.com/Fortinet/NSE6_FAZ-7.2-practice-exam-dumps.html
Verified & Latest NSE6_FAZ-7.2 Dump Q&As with Correct Answers: https://drive.google.com/open?id=1y3EpoqXnBidb1LKJDeWbr7Q5hTY-E1O0