Pass Guaranteed Quiz 2021 Realistic Verified Free HPE6-A66 Exam Dumps
Free HP Certification HPE6-A66 Ultimate Study Guide (Updated 60 Questions)
Understanding functional and technical aspects of Gather and analyze data, and document customer requirements
The following will be asked from you in the HP HPE6-A66 exam dumps pdf:
- Given an outline of a customer’s needsfor a simple campus environment determine the information required to create a solution
NEW QUESTION 24
Which feature does the Aruba AP 387 support?
- A. Indoor usage
- B. included external directional antennas
- C. 60GHZRF
- D. 802.11 ax
Answer: C
NEW QUESTION 25
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?
- A. New Campus
- B. New Site
- C. New Express Mode
- D. New Project
Answer: A
NEW QUESTION 26
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
- A. two-tier and 40 Gbps
- B. three-tier and 40 Gbps
- C. three-tier and 10 Gbps
- D. two-tier and 10 Gbps
Answer: C
NEW QUESTION 27
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Provision adequate bandwidth.
- B. Determine the number of users per location.
- C. Implement appropriate security controls
- D. Provide appropriate AP density.
Answer: D
NEW QUESTION 28
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?
- A. Start Page
- B. Catalog
- C. Site-1
- D. Topology
Answer: C
NEW QUESTION 29
Which type of Aruba AP uses its radio as its back-haul connection?
- A. Air Monitor (AM)
- B. Mesh Porta
- C. Mesh Point
- D. Remote AP (RAP)
Answer: B
NEW QUESTION 30
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 15-30 feet (5-10 m)
- B. 3-10 feet (1-3 m)
- C. 3 feet (1 m)
- D. 30-60 feet (10-20 m)
Answer: C
NEW QUESTION 31
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. SFP
- B. QSFP28
- C. SmartRate
- D. QSFP+ LC
Answer: C
NEW QUESTION 32
A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?
- A. Define the appropriate properties in the Building View
- B. Spit the Building View into two Floorplan Views
- C. Define the appropriate properties in the Network View
- D. Create a Region in the Floorplan View
Answer: A
NEW QUESTION 33
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 510s
- B. Multi-mode fiber between campus switches
- C. Two outdoor AP 367s
- D. Two outdoor AP 387s
Answer: C
NEW QUESTION 34
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. Mobility First
- B. Network Analysis Engine
- C. NetEdit
- D. 2 CiearPass
Answer: C
NEW QUESTION 35
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 10MHZ
- B. 60 MHZ
- C. 20 MHz
- D. 40 MHZ
Answer: B
NEW QUESTION 36
Which AP mode allows an AP to operate autonomously?
- A. IAP
- B. OCAP
- C. AM
- D. RAP
Answer: B
NEW QUESTION 37
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Place the APs above the ceiling and behind the walls
- B. Order Aruba AP covers for the APs
- C. Place a strip of tape over the LEDs
- D. Paint the APs to match the ceilings or walls
Answer: A
NEW QUESTION 38
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Case-sensitive SSID name
- B. Case-insensitive SSID name
- C. Radio MAC address
- D. Wireless device MAC address
Answer: D
NEW QUESTION 39
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 40
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Spectrum clearing
- B. Virtual
- C. Active
- D. Passive
Answer: C
NEW QUESTION 41
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
- B. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
- C. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
- D. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
Answer: D
NEW QUESTION 42
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1
- C. 1,030
- D. 2
Answer: C
NEW QUESTION 43
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
- B. Two 7030 mobility controllers in a cluster
- C. A standalone 7008 controller per floor
- D. Two 7205 mobility controllers in a cluster
Answer: A
NEW QUESTION 44
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 0
- B. 2930M
- C. 2930F
- D. 5406R
Answer: A
NEW QUESTION 45
......
Sample Questions
NewRocket requires a network connection between the main corporate building and a very small building on a campus. This connectivity needs to provide at least 700 Mbps throughput using a wireless solution. An AP will be placed inside each buildingâs lobby near the entrance glass doorway that interconnects the two buildings. The distance between these two doors is approximately 30 feet (10 meters). The connection to the closest wiring closet in each respective building is approximately 280 feet (86 meters) for each AP. The customer needs a solution that will:
- Provide meshing on a dedicated 5 Ghz radio to interconnect the two buildings with an appropriate integrated antennas
- Provide a dedicated 5 Ghz radio for lobby connectivity
Which solution would best meet NewRocketâs requirements?
- The Aruba AP 387 with Cat 7 cabling
- Aruba AP 500 with MMF cabling
- Aruba AP 374 with MMF cabling
- Aruba AP 535 with Cat 7 cabling
A network architect is analyzing the current wireless coverage in a new design. Standing 10 feet (approximately 3 meters) away from the AP, the architect tests the wireless signal from the AP. The architect then moves 20 feet (approximately 6 meters) away from the AP and repeats the test. Given that the architect detects no external interference with the signal, by how much would you expect the signal to degrade between the two tests?
- By a factor of 4
- By a factor of 2
- By a factor of 1
- By a factor of 8
A wiring closet with a POE+ switch is 300 feet (100 meters) away from an AP on a building floor. The APâs smart-rate port is connected to a smart-rate port on the switch, which is also capable of 10 Gbps. The cable type is Cat6a STP. What is the maximum speed that the customercan expect from the connected AP?
- 5 Gbps
- 10 Gbps
- 1 Gbps
- 2.5 Gbps
How would a network administrator view the price list of the equipment in one wiring closet?
- Create a Wiring Closet in the site; set the filter in the Design Group to Wiring Closet
- Create a Design Group in the Site; set the filter in the Layers to Design Group
- Create a Design Group in the site; set the filter in the BOM to the Design Group
- Create a Workspace in the site; set filter in the BOM to the Workspace
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- Type of users
- Density of users
- Mobility requirements and usage
- Number of users per location
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- Providing consistent performance on all available channels
- Determining the RF channel bandwidth consumed per Barcode scanner
- Roaming between APs
- Encountering RF interference by devices
- Implementing adequate security measures to ensure PCI compliance
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
Given this information, which Aruba solution would be the most cost-effective while still meeting the customer’s requirements?
- Two 7205 mobility controllers in a cluster
- An IAP cluster per floor
- Two 7030 mobility controllers in a cluster
- A standalone 7008 controller per floor
Which must you perform in IRIS to assign a device to a Design Group?
- Drag and drop the device into the Site
- Right-click the device and select Set Design Group
- Right-click the device and select Set Layer Membership
- Drag and drop the device into the Design Group
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards.
What type of survey should the network architect perform?
- Spectrum clearing
- Active
- Passive
- Virtual
Get to the Top with HPE6-A66 Practice Exam Questions: https://www.lead1pass.com/HP/HPE6-A66-practice-exam-dumps.html
Use Real HPE6-A66 Dumps Free Sample Questions and Practice Test Engine : https://drive.google.com/open?id=1NQv11iZGH13AlOVu1C9VZM7v2OvxLQUZ