[Oct 17, 2023] C_S4TM_2020 PDF Dumps is essential on your C_S4TM_2020 Exam Questions Certain Success!
C_S4TM_2020 PDF Questions - Perfect Prospect To Go With C_S4TM_2020 Practice Exam
NEW QUESTION # 64
You want to configure a scenario in which one trailer is coupled subsequently to different trucks. Which of the following must you customize? Note: there are 2 correct answers to this question.
- A. Forwarding order type
- B. Freight booking type
- C. Transportation unit type
- D. Freight order type
Answer: A,C
NEW QUESTION # 65
What are generated in SAP ERP and transferred to SAP TM as requirements for planning in the context of shipping? Please choose the correct answer.
- A. SAP Manufacturing
- B. Sales orders.
- C. Discrete manufacturing.
- D. Seamless integration.
Answer: B
NEW QUESTION # 66
What is used as the source location of the OTR? Please choose the correct answer.
- A. The shipping point determined in ERR
- B. Order-based transportation requirements
- C. Forwarding orders
- D. Delivery-based transportation requirements
Answer: A
NEW QUESTION # 67
What do you need to maintain to ensure that certain products are always shipped by air?
- A. Instructions
- B. Allocations
- C. Incompatibilities
- D. Compartments
Answer: C
NEW QUESTION # 68
You want to make sure that a particular forwarding house is entered as the ordering party in a freight order based on the ID of the consignee. What do you have to define in Customizing for the freight order type?
- A. Shipper/consignee determination
- B. Partner determination profile
- C. Tendering settings
- D. Organizational unit determination condition
Answer: B
NEW QUESTION # 69
You want to ensure that the system interprets rates entered into the rate table as percentages where can you make this setting?
- A. In the scale
- B. In the instruction type
- C. In the calculation sheet
- D. In the charge type
Answer: D
NEW QUESTION # 70
In which document types can you enable cost distribution in SAP TM?
There are 2 correct answers to this question.
- A. Forwarding settlement document
- B. Freight order
- C. Freight unit
- D. Freight settlement document
Answer: B,D
NEW QUESTION # 71
The following settings are defined for a freight order from location A to location B with two freight units:
* The distance between locations A and B in the transportation lane is 1500 km, the duration is 19 hours and the Fix Transportation Duration flag is set. The average speed for the means of transport is defined as 100 km/h and the GIS quality flag is NOT set.
Loading and unloading of each freight unit at locations A and B is defined as 1 hour.
The vehicle resource is available weekdays from 8:00 am to 8:00 pm.
* Loading starts on Monday at 8:30 am. When is unloading finished?
Please choose the correct answer.
- A. Tuesday 7:30 am
- B. Tuesday 5:30 pm
- C. Tuesday 3:30 pm
- D. Tuesday 7:30 pm
Answer: D
NEW QUESTION # 72
For which of the following business objects is tracking and tracing provided in SAP Transportation Management? Note: There are 2 correct Answers to this question.
- A. Resource
- B. Forwarding order
- C. Service order
- D. Freight order
Answer: A,D
NEW QUESTION # 73
Which transactions can you use to run the path finder?
Note: There are 2 correct Answers to this question.
- A. Carrier selection
- B. Transportation network cockpit
- C. Explanation tool
- D. Edit freight order
Answer: B,C
NEW QUESTION # 74
In the logistics integration profile, the Incoterm location stage building is set to "Source location to Incoterm location- type 1". You create a sales order in which you have specified an Incoterm and Incoterm location. What will be the result of these settings?
- A. Two stages created: An active stage from the source location to the Incoterm location, and an additional non-planning-relevant stage from the Incoterm location to the destination location is created
- B. One stage created: An active stage from the source location to the Incoterm location is created
- C. Two stages created: An active stage from the Incoterm location to the destination location, and an additional non-planning-relevant stage from the source location to the Incoterm location
- D. One stage created: An active stage from the Incoterm location to the destination location
Answer: A
NEW QUESTION # 75
You want to set up charge calculation for freight orders. Valid charges should consist of a based on the distance and gross weight of the freight order, and a supplemental charge per container that is included in the freight order. Multiple containers are allowed for each freight order, and the charge is based on the container type can be small, medium or large. What is the minimum number of charge lines with instruction type "standard" that you must set up?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 76
What is maintained in the ERP system, from where it is transferred to SAP TM as locations and business partners using the SAP Core Interface (GIF)?
Please choose the correct answer.
- A. The output of error
- B. You can use the dangerous.
- C. The customer and supplier master data.
- D. The processing of the dangerous.
Answer: C
NEW QUESTION # 77
You can define the SAP TM-relevant hierarchy in Customizing. Choose Transportation Management -► Transportation Network -► Define Transportation Zone Hierarchy.
The following conditions apply when you define a transportation zone hierarchy:
(2 correct answer)
- A. Determine routing based on Incoterms
- B. You cannot assign a transportation zone A to another zone B if B already contains A
- C. You cannot assign a transportation zone to itself
Answer: B,C
NEW QUESTION # 78
Which of the following systems integrate with SAP TM? There are 3 correct answers to this question.
- A. SAP Integrated Business Planning
- B. SAP Environment Health & Safety
- C. SAP Supplier Network Collaboration
- D. SAP Business Warehouse
- E. SAP Customer Relation Management
Answer: B,D,E
NEW QUESTION # 79
You want to configure a scenario in which a single trailer will be hauled by more than one truck. Which of the following must you customize? Note: There are 2 correct Answers to this question.
- A. Freight order type
- B. Forwarding order type
- C. Freight booking type
- D. Transportation unit type
Answer: A,B
NEW QUESTION # 80
Over fifty predefined condition types are used in the following:
There are 3 correct answers to this question.
- A. Organizational unit determination
- B. Document type determination
- C. Incompatibilities
- D. destination locations are stored on item level.
Answer: A,B,C
NEW QUESTION # 81
What is stored for each business partner role?
Please choose the correct answer.
- A. Instead
- B. As a copy of an existing forwarding order
- C. Specific data
- D. From the order management overview
Answer: C
NEW QUESTION # 82
Which of the following functions can a carrier perform in the collaboration portal? Note: there are 2 correct answers to this question.
- A. Report events for ocean shipments
- B. Create an invoice for air shipments
- C. Enter vehicle registration number for a freight order
- D. Respond to new freight agreement RFQs
Answer: A,D
NEW QUESTION # 83
Different business partners with various relationships to one another exist in the marketplace. Examples of business partners are:
There are 3 correct answers to this question.
Response:
- A. Employee
- B. Enable
- C. Contact person and Driver
- D. Customer And Vendor
Answer: A,C,D
NEW QUESTION # 84
Based on your company policy, the hazardous product POISON should NOT be transported on means of transport TRUCK unless authorized by user A.
How can you maintain the system reaction in the corresponding incompatibility definition used by user A? Note: There are 2 correct Answers to this question.
- A. Automatic Violation: Incompatibility Must Not Be Violated. Manual Violation: Incompatibility Is Ignored
- B. Automatic Violation: Incompatibility Must Not Be Violated. Manual Violation: Incompatibility Must Not Be Violated
- C. Automatic Violation: Incompatibility Must Not Be Violated. Manual Violation: Warning If Incompatibility Is Violated
- D. Automatic Violation: Incompatibility Is Ignored. Manual Violation: Warning If Incompatibility Is Violated
Answer: B,C
NEW QUESTION # 85
You have flagged "GIS quality" for your means of transport, LORRY, to calculate distances and durations accurately based on GIS (geographical-information-system). In which of the following apps/customizing tasks can you define durations that impact the scheduling of a freight order using means of transport LORRY?
Note: There are 2 correct answers to this question.
- A. Define transportation lane
- B. Maintain scheduling constraints
- C. Edit schedule
- D. Define scheduling settings
Answer: A,D
NEW QUESTION # 86
......
SAP C_S4TM_2020 certification exam is designed for individuals who have a good understanding of SAP Transportation Management. It is an associate-level certification that validates the candidate's knowledge in the area of Transportation Management in SAP S/4HANA. C_S4TM_2020 exam is suitable for those who are involved in the implementation, customization, and support of SAP Transportation Management.
C_S4TM_2020 Exam with Accurate SAP Certified Application Associate - Transportation Management in SAP S/4HANA PDF Questions: https://www.lead1pass.com/SAP/C_S4TM_2020-practice-exam-dumps.html