[May 23, 2023] New Updated H35-260 Exam Questions 2023
Updated Free Huawei H35-260 Test Engine Questions with 333 Q&As
The Huawei H35-260 exam is an essential certification for professionals who want to work in the telecommunications industry. The exam validates the candidate's skills and knowledge in transmission technologies, which are critical for the design, deployment, and maintenance of modern telecommunications networks. The certification also demonstrates the candidate's commitment to professional development and continuous learning, which is highly valued in the industry.
The Huawei H35-260 certification exam is a highly sought-after certification in the telecommunications industry. Professionals who are certified in Huawei's transmission network products are highly valued by employers as they possess the knowledge and skills required to handle complex transmission network issues. Certified professionals are also in high demand as they can help organizations to optimize their transmission network performance, reduce downtime, and improve the overall quality of service.
NEW QUESTION # 172
OSN6800 equipment, ND2, TQX report the BUS_ERROR alarm after configuring the power cross-connect, what are the possible reasons?
- A. Subrack Hardware Limitations
- B. The TQX client side business type is set incorrectly
- C. The crossover board, TQX board or ND2 board is faulty
- D. Cross bus capacity is limited
Answer: A,C,D
NEW QUESTION # 173
Which of the following descriptions about the IS-IS backbone area are correct?
- A. It is composed of all L2 routers (including L1/L2)
- B. For inter-area routing
- C. Identify with area 0
- D. can be discontinuous
Answer: A,B
NEW QUESTION # 174
Using Huawei PTN7900 to carry the L3VPN service, there is no need to plan VPN peers between the two devices
- A. Between different L2/L3PTN and L3PTN sink node pairs
- B. Active and standby L2/L3PTN equipment rooms
- C. Between L3PTNs at the core layer
- D. Between L2/L3PTN and L3PTN at the core layer
Answer: A,B
NEW QUESTION # 175
Which of the following is the main structure of the N-way wavelength multiplexing WDM system?
- A. Optical Amplification Unit
- B. Optical wavelength conversion unit
- C. Intersection Unit
- D. Monitoring Unit
- E. Wavelength Division Multiplexing Unit
Answer: A,B,D,E
NEW QUESTION # 176
The pump laser is the energy source of the EDFA, and its function is to provide energy for the amplification of the optical signal. Which of the following wavelengths can be used as the output wavelength of the pump source in the EDFA structure?
- A. 980nm
- B. 1480nm
- C. 1310nm
- D. 1510nm
Answer: A,B
NEW QUESTION # 177
0TUK_LOF is a 0TUK layer alarm, which means the OTuk frame is lost, the FAS frame alignment is detected, and the alarm is reported when the frame is out of synchronization for 5ms. The alarmends after the frame synchronization state is restored for 5ms.
- A. False
- B. True
Answer: A
NEW QUESTION # 178
According to the formula of ODUk rate2391C 239K) STMHM to car: ODUI to car 239/235- STMN frame rate.
- A. False
- B. True
Answer: A
NEW QUESTION # 179
In order to quickly locate and eliminate the faults of optical network equipment in a timely manner, maintenance personnel are proficient in the basic operation of common transmission instruments. Which of the following instruments are commonly used in optical network equipment maintenance?
- A. 2M Bit Error Tester
- B. Multimeter
- C. SDH Analyzer
- D. Pigtail
- E. Optical Power Meter
- F. Light decay
Answer: A,B,C,E
NEW QUESTION # 180
The DCN red copper feature between network elements of PTN, which VLAN number is used by default for DCN self-communication between network elements.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 181
The PTN3900 device needs to complete the access and processing of E1 signals through the processing board, service daughter card, and interface board. Which of the following boards is not involved in the work?
- A. CD1
- B. D12/D75
- C. MQ1
- D. MP1
Answer: D
NEW QUESTION # 182
Which of the following items can be included in the upgradeable boards of the PTN3900 NE upgrade operation?
- A. Main control board
- B. Cross Plate
- C. Fan Board
- D. Business Processing Board
Answer: A,B,D
NEW QUESTION # 183
Which of the following are the possible reasons for the disconnection of network elements?
- A. Failure of the main control board of the network element
- B. The gateway network element connection is interrupted
- C. The device is running
- D. All the optical paths to the NE are faulty
Answer: A,B,D
NEW QUESTION # 184
Which of the following response modes is usually used when diagnosing unidirectional tunnel connectivity in a PTN network?
- A. TCP channel
- B. Application Control Channel
- C. IPV4/UDP reply
- D. No response
Answer: D
NEW QUESTION # 185
When creating an electrical layer path, what options (Client, ODUK, ODUflex) may cause the route calculation to fail
- A. Routing resources are unavailable
- B. Services cannot be created between ports
- C. The optical power attenuation on the service layer path OCH is too large
- D. Unable to satisfy routing constraints
Answer: A,B,D
NEW QUESTION # 186
In the LTE service, X2 traffic forwarding between base stations needs to be enabled. Which of the following statements about the forwarding path in the x2 traffic flow is correct?
- A. X2 traffic forwarding between different cities requires SGW participation
- B. For forwarding in the X2 flow between base stations on different network segments under the same L2L3 node, it is necessary to transfer between L3VE sub-interfaces
- C. Different L2L3 nodes must forward the X2 traffic with the base station to the base station, and it must be transited by the L3 node.
- D. X2 traffic forwarding on the same network segment does not require Layer 3 routes or interfaces
Answer: B
NEW QUESTION # 187
Which of the following detection methods can locate the fault point of LSP?
- A. LT
- B. MPLS Ping
- C. CC
- D. ZMPLS Tracert
Answer: A,D
NEW QUESTION # 188
On the U2000 network management, you can make an inner ring and an outer ring on the PTNE1 port to facilitate testing
- A. False
- B. True
Answer: A
NEW QUESTION # 189
Which of the following item levels are included in the MPLS-TP OAM detection object?
- A. PW layer
- B. Tunnel layer
- C. Section layer
- D. Link Layer
Answer: A,B,C
NEW QUESTION # 190
The MPLS label has four identification fields, Lable, EXP, S and TTL, with a total of 4 bytes, of which Lable occupies 20 bits. The label value 0-15 is reserved for special purposes, which indicates that the inner payload carried is MPLS-OAM packet. , the label value is which of the following?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 191
For ODUK SNCP protection, which of the following types does not apply to the pass-through site being an electrical relay site?
- A. SNC/S and SNCN
- B. SNC/N
- C. SNC/S
- D. SNC/I
Answer: D
NEW QUESTION # 192
Whether it is the OSI reference model or the TCP/IP protocol, the existence of the data link layer is mainly to realize which of the following functions?
- A. Provide media access
- B. Addressing and Routing
- C. Bitstreaming
- D. Establish a host end-to-end connection
Answer: A
NEW QUESTION # 193
PTN's ACR time sodium and 1588 clock can achieve time synchronization.
- A. False
- B. True
Answer: A
NEW QUESTION # 194
Which of the following LSRs are passed by an LSP?
- A. Ingress
- B. Lable
- C. Transit
- D. Egress
Answer: A,C,D
NEW QUESTION # 195
Which of the following identification fields in the data packet header of each protocol layer cannot identify the upper layer data type carried by this layer?
- A. Source Port
- B. TTL
- C. Protocol
- D. TYPE
Answer: B
NEW QUESTION # 196
......
Try 100% Updated H35-260 Exam Questions [2023]: https://www.lead1pass.com/Huawei/H35-260-practice-exam-dumps.html
The Best HCSA-Field-Transmission H35-260 Professional Exam Questions: https://drive.google.com/open?id=1S2TkCnBDWSFSVqWp8UKkbonhAHFBzwoS