Master 2021 Latest The Questions F5 Networks Certification Study Materials and Pass 301 Real Exam! [Q18-Q38]

Share

Master 2021 Latest The Questions F5 Networks Certification Study Materials and Pass 301  Real Exam!

Penetration testers simulate 301 exam PDF

NEW QUESTION 18
Which statement concerning virtual servers is true?

  • A. Virtual servers cannot perform load balancing without performing address translation.
  • B. Virtual server processing always translates the virtual server address to the address of the chosen pool member.
  • C. Virtual servers can compress data between the BIG-IP and servers.
  • D. Virtual servers can reuse connections between the BIG-IP and server for multiple HTTP GETs.
  • E. Virtual servers can keep idle server connections open indefinitely.

Answer: D

 

NEW QUESTION 19
How is traffic flow through transparent virtual servers different from typical virtual servers?

  • A. the value in the tcp acknowledgement field
  • B. any bytes within the initial client request packet
  • C. an IP address
  • D. any text string within a cookie

Answer: C,D

 

NEW QUESTION 20
How many events can be referenced in a given iRule?

  • A. Exactly one.
  • B. iRules can have up to event if one is client-side and one is server-side.
  • C. iRules can have multiple events.
  • D. iRules are limited to one event, but a virtual server could be associated with multiple rules.

Answer: C

 

NEW QUESTION 21
What occurs when a load?command is issued?What occurs when a ? load?command is issued?

  • A. the running configuration is replaced by the configuration in the files, but only if they are syntactically correct.
  • B. The running configuration is replaced by the any portion of the configuration files that are syntactically correct.
  • C. The running configuration is compared to the configuration in files and, when changes are noted, the version in the files is loaded over what is in money.
  • D. The running configuration is loaded into files for storage.

Answer: A

 

NEW QUESTION 22
A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?

  • A. This assignment is not allowed since the port do not match.
  • B. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.
  • C. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.
  • D. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.

Answer: D

 

NEW QUESTION 23
Which three statements are true about SNATs? (Choose three.)

  • A. SNAT s support UDP, TCP, and ICMP traffic.
    C, SNAT s provide a many-to-one mapping between IP addresses.
  • B. SNAT addresses can be identical to virtual server IP addresses.
  • C. SNAT s provide bi-directional traffic initiation.

Answer: A,B

 

NEW QUESTION 24
A, steaming profile will do which of the following?

  • A. Search and replace the first occurrence of a specified of a specified string in either a request or response processed by a virtual server.
  • B. Search and replace all occurrences of a specified string only in request processed by a virtual server.
  • C. Search and replace all occurrences of a specified string only is responses processed by a virtual server.
  • D. Search and replace all occurrences of a specified string in requests and responses processed by a virtual server.

Answer: D

 

NEW QUESTION 25
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?

  • A. The context has no impact on events.
  • B. The context determines which pools are available for load balancing.
  • C. The context determines which events are available for iRule processing.
  • D. The context determines the values of commands that vary between client and server.

Answer: D

 

NEW QUESTION 26
A BIG-IP has the following objects configured: A SNAT pool with 2 members: 150.10.33.33 and 10.10.1.33 A load-balancing pool with 5 members: 10.10.1.1-10.10.1.5:80
The BIG-IP has two self-IP addresses: 150.10.10.10 and 10.10.1.10 A virtual server at 150.10.30.30:80 that is associated with both the SNAT pool and the load-balancing pool. If a client at IP address 200.10.10.10 initiates a connection to the virtual server, what will the source IP address be in the packets sent to the chosen pool member?

  • A. 150.10.30.30
  • B. 200.10.10.10
  • C. 10.10.1.33
  • D. It could be any of the addresses of the members of the load-balancing pool.
  • E. 150.10.33.33
  • F. 10.10.1.10

Answer: C

 

NEW QUESTION 27
Which statement is true concerning packet filters?

  • A. Filters cannot prevent access to the management port.
  • B. The order of filters does not affect which traffic is accepted or denied
  • C. In addition to administrator-created filters, three always exists a "deny all" filter that processes traffic last.
  • D. Filters cannot prevent the BIG_IP synching process from taking place.

Answer: A

 

NEW QUESTION 28
Which statement is true concerning iRule context?

  • A. The rule command determines the context.
  • B. The iRule event declaration determines the context.
  • C. The results of the iRule's conditional statement determines the context.
  • D. the context must be explicitly declared.

Answer: B

 

NEW QUESTION 29
A monitor has been defined using the HTTP monitor template. The send and receive strings were customized, but all other settings were left at their defaults. Which resources can the monitor be assigned to?

  • A. most pools
  • B. most virtual severs
  • C. most nodes
  • D. only specific pool members

Answer: A

 

NEW QUESTION 30
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined, and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. Vi rtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured Vi rtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network Vi rtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNAT1 Source IP: 10.10.0.0 netmask 255.255.0.0 SNAT Address: SNAT Pool with 2 members
172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNATAddress:
10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1

  • A. Source IP: 10.10.2.1; Destination IP: pool in the 172.16/16 network C
  • B. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
  • C. The request will be droped.
  • D. connection attempt is made with a source IP and port of 10.10.100.50:2222 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
  • E. Source IP: 10.10.2.102; Destination IP 10.10.2.10
  • F. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2.10

Answer: F

 

NEW QUESTION 31
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?

  • A. /config/BigDB.dat
  • B. /etc/bigip_base.conf
  • C. /config/bigip_base.conf
  • D. lconfig/bigip.conf

Answer: D

 

NEW QUESTION 32
When defining a load-balancing pool using the command line, if the load-balancing method is not specified, what is the result

  • A. An error would be displayed since no load-balancing method was specified.
  • B. The system would prompt the user for a load-balancing method.
  • C. The load-balancing method of the previous pool would be used.
  • D. The default load-balancing method would be used.

Answer: D

 

NEW QUESTION 33
Which is the result when multiple monitors are assigned to a pool member?

  • A. The member is marked available if sufficient monitors succeed, and as unavailable if insufficient monitors succeed.
  • B. The member is marked as unavailable if any of the monitors fails.
  • C. The member is marked as available if any of the monitors succeed.
  • D. The member is marked available if all monitors succeed, and as marginal if one or more monitors fail(s).

Answer: A

 

NEW QUESTION 34
Which three parameters could be used to determine whether a connection request will have the source address translated as the request is processed? (Choose three.)

  • A. the client's IP netmask
  • B. the client's IP address
  • C. the client IP fragment offset
  • D. the client's browser's preferred language
  • E. the client's TCP port
  • F. the client's router's IP address

Answer: B,D,E

 

NEW QUESTION 35
Which action CANNOT be performed by an iRule?

  • A. Discard a client before connecting to a server.
  • B. Direct a connection request to a specific pool.
  • C. Substitute a server's response with alternate data.
  • D. Limit a given client to a set amount of bandwidth.
  • E. Chang the virtual server's default pool.
  • F. Direct a client's request to a pool based on the client's browser's language.

Answer: E

 

NEW QUESTION 36
Which are immediate results of entering the following command: b pool PoolA . { lb method predictive member 10.10.1 .1:80 member 10.10.1.2:80 }

  • A. No changes will take place since the command is missing the monitor component for PoolA.
  • B. Requests sent to this BIG-IP system with a destination port of 80 are load-balanced between the members of Pool
  • C. a new pool is available for association with any iRule or virtual server.
  • D. The /config/bigip.cinf file is updated to include a definition for the pool named PoolA.

Answer: C

 

NEW QUESTION 37
......

Penetration testers simulate 301 exam: https://www.lead1pass.com/F5/301-practice-exam-dumps.html