[Dec 31, 2021] Latest NS0-516 PDF Dumps & Real Tests Free Updated Today
NS0-516 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
NetApp NS0-516 Exam Certification Details:
| Exam Code | NS0-516 NCIE SAN Specialist E-Series |
| Exam Price | $150 USD |
| Exam Name | Implementation Engineer SAN Specialist E-Series |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
| Passing Score | 75% |
| Sample Questions | NetApp NS0-516 Sample Questions |
| Duration | 90 minutes |
| Recommended Training | E-Series Fundamentals (WBT) Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems (ILT) |
NEW QUESTION 99
An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume.
In this scenario, which statement is correct?
- A. Suspend mirroring operations on the orphan then resume operations
- B. Remove the mirroring relationship on the orphan then re-create the mirroring relationship
- C. Perform a role change on the orphan then re-create the mirroring relationship
- D. Deactive the mirror consistency group that contains the orphan then re-enable the group
Answer: B
NEW QUESTION 100
A customer intends to use an E2812 system without expansion shelves. The specification for their Windows host requires that six E-Series data volumes be used.
In this scenario, how should the system be configured?
- A. one DDP for each volume
- B. one DDP with all the volumes
- C. three DDPs with the volumes divided equally
- D. two DDPs with the volumes divided equally
Answer: B
NEW QUESTION 101
How many paths provide optimal redundancy from a host through a switched topology to a storage system?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 102
What is a NetApp best practice recommendation for the system monitor?
- A. It should run only on Windows server systems.
- B. It should run only on one management server connected to the storage system.
- C. It should run on all storage manager clients.
- D. It should be stopped during a controller firmware upgrade.
Answer: B
NEW QUESTION 103
You are setting-up asynchronous mirroring between two E2860 systems.
In this scenario, which two prerequisites are required to complete the setup? (choose two)
- A. Both the primary and secondary systems must have the same premium features licensed
- B. both the primary and secondary systems must be using the same subnets for mirroring connections
- C. The secondary system must have 2X the storage capacity of the primary system
- D. Both systems must be discovered by an Enterprise Management Window (EMW) or SANtricity Unified Manager
Answer: A,D
NEW QUESTION 104
What are two base host connectivity selections that are provided by the E2800 controller? (Choose two.)
- A. SAS
- B. FC
- C. IB
- D. iSCSI
Answer: B,D
NEW QUESTION 105
In the AMW, which tab provides access to Ethernet management port configuration and premium feature enablement? (Choose the best answer.)
- A. Hardware
- B. Storage & Copy Services
- C. Setup
- D. Host Mappings
- E. Configuration
Answer: C
NEW QUESTION 106
What measurement refers to how much data can be handled in a given time period? (Choose the best answer.)
- A. Throughput
- B. I/O alignment
- C. IOPS
- D. Read modify write
- E. Parity
Answer: A
NEW QUESTION 107
What is the proper order to power-on E-Series arrays when a storage system has at least 2 trays? (Choose the best answer.)
- A. Power on the controller drive tray first, then wait several minutes for the controller drive tray to spin up, and then power on all expansion drive trays
- B. Power up A-side power supplies first, then power up all B-side power supplies.
- C. Power all expansion drive trays first, wait several minutes for the expansion drive trays to spin up, and then power on the controller drive tray
- D. Power on in any order, since the order does not matter
Answer: A
NEW QUESTION 108
Witch function does the SANtricity Enterprise Management Window (EMW) provide? (Choose the best answer.)
- A. a Manage Host Port Identifiers dialog box
- B. a multipath I/O driver
- C. volume reconstruction progress updates
- D. a configuration interface for creating disk pools and volume groups
- E. a device discovery option for storage systems to be managed
Answer: E
NEW QUESTION 109
Which statement describes a drive channel?
- A. It is the physical Ethernet link between the host and disk shelves that transfers controller commands.
- B. It is defined by a host connection.
- C. It is replicated for each controller.
- D. It is the physical SAS link between a controller shelf and disk shelves that transfers I/O data.
Answer: D
NEW QUESTION 110
Which file contains the configuration for a multipath driver for FC on Linux systems?
- A. /etc/dm-multipath.conf
- B. /etc/kernel/mp.conf
- C. /etc/multipath.conf
- D. /opt/multipath/multipath.cnf
Answer: C
NEW QUESTION 111
What is the 'base' host connectivity provided by the E2600 controller? (Choose the best answer.)
- A. SAS
- B. FC
- C. None
- D. IB
- E. iSCSI
Answer: A
NEW QUESTION 112
Exhibit:
Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)
- A. Reinitialize the FC switch
- B. Swap out the HBA on the FC switch
- C. Move the connection to another controller port
- D. Swap out the SFP in the controller port
- E. Swap out the FC cable
Answer: A,D,E
NEW QUESTION 113
Which NetApp tool provides information on size, weight, acoustic noise, and power of NetApp E-Series systems?
- A. Config Advisor
- B. Interoperability Matrix Tool
- C. Hardware Universe
- D. Active IC
Answer: C
NEW QUESTION 114
Exhibit button.
Referring to the exhibit, what is the reason for the errors that are shown on port 5 on the switch of one of the fabrics?
- A. wrong switch configuration
- B. twisted cables, wrong plugs, or cable material
- C. faulty SFPs, cables, or patch panels
- D. protocol errors, encoding errors, or conversion errors
Answer: D
NEW QUESTION 115
During normal operation, a failure was detected on an E-Series hardware component.
Which tool could be used to determine the location of the failed component and understand the potential recovery actions? (Choose the best answer.)
- A. Real-time performance monitor
- B. Host Mappings tab
- C. Unreadable sectors log
- D. Recovery Guru
Answer: B
NEW QUESTION 116
Which interface is used to view and change the logical structure of a storage system? (Choose the best answer.)
- A. Disk Manager
- B. Ldisk
- C. AMW
- D. VI
- E. EMW
Answer: C
NEW QUESTION 117
You need to run a command from the SANtricity System Manager GUI to mark drives as native by using the CLI tool on an E-Series system that is running System Manager 11.60 or higher.
In this scenario, where would you locate this tool?
- A. Modify Existing Storage
- B. Settings -> System -> Addons
- C. Help -> CLI Command Reference
- D. Support -> Support Center -> Diagnostics
Answer: B
NEW QUESTION 118
What happens if one disk chosen for a volume group has a capacity of 2 TB and the other five disks have a capacity of 4 TB?
- A. SANtricity allows the creation of the volume group but places it offline until you add another 2-TB disk.
- B. SANtricity recognizes all disks as 4 TB.
- C. SANtricity will never allow this combination.
- D. SANtricity recognizes all disks as 2 TB.
Answer: D
NEW QUESTION 119
When you power off a storage system, which component should be powered off first?
- A. The controller shelf
- B. The configuration database
- C. The SANtricity client
- D. All disk shelves
Answer: A
NEW QUESTION 120
You want to find detailed information about the devices that are connected to the Brocade switch.
In this scenario, which command would accomplish this goal?
- A. switchshow
- B. zoneshow
- C. nsshow
- D. portloginshow <port>
Answer: D
NEW QUESTION 121
What is the first step when replacing a FRU component on a running storage system? (Choose the best answer.)
- A. Disconnect the cables from the management ports.
- B. Use SANtricity to view the target component and place the component off-line or in service mode before removing the part.
- C. Remove the part and check SANtricity for continuing errors.
- D. Power down the array before changing the part.
Answer: B
NEW QUESTION 122
A NetApp recommended best practice is to cable disk shelves to a controller shelf using the top-down-bottom-up method.
Why?
- A. It protects against disk failure.
- B. It protects against drawer failure.
- C. It protects against power outages.
- D. It protects against shelf failure.
Answer: D
NEW QUESTION 123
......
NetApp NS0-516 Exam Topics:
| Section | Objectives |
|---|---|
| Storage Configuration | -Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups. |
| Management | -Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager. |
| SAN | -Describe the end-to-end network configuration for Fibre Channel and Ethernet. |
| Protection | -Describe how Data Assurance with media scan protects your data. - Describe SANtricity data protection features. |
| Toolbox | -Describe the tools required to design and implement an E-Series solution. |
| Documentation | -Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution. |
| Host Side | -Describe the different host connection options for E-Series systems. -Describe how to configure hosts for multipathing. |
| Troubleshooting | -Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system. |
| Hardware | -Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features. |
2021 Valid NS0-516 test answers & Network Appliance Exam PDF: https://www.lead1pass.com/NetworkAppliance/NS0-516-practice-exam-dumps.html
Pass Network Appliance NS0-516 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=1cJj_SrFwqwVPrvqsFUCuNKFyfgGDqIUK