[Dec-2021] 300-710 Exam Dumps, 300-710 Practice Test Questions
Attested 300-710 Dumps PDF Resource [2021]
Who Can Sit for 300-710?
Particularly, such an exam is for those candidates who are pursuing either the professional-level CCNP Security or the Cisco Certified Specialist - Network Security Firepower designations. To be awarded the latter certificate, all candidates have to nail just 300-710 SNCF test. However, to earn the professional-level CCNP Security certificate, candidates must combine exam 300-710 SNCF with the Cisco 350-701 SCOR, also known as Executing and Operating Cisco Security Core Technologies exam. In all, these certification exams can be taken by people who are looking to validate their IT skills and capabilities. They can also be pursued by those who are looking to acquire new skills that are highly valuable. These Cisco certifications might as well be needed by employees if there has been a change in the law or simply to comply with company requirements. Furthermore, these validations will be perfect for those trying to make their résumés stand out from the competition, which means candidates will be more likely to get hired. To add more, they are perfect for those applicants who are looking to increase the operational efficiency of the company they work for and those looking to receive recognized digital badges for all their social media profiles. As a rule, both of these Cisco certifications have a validity period of 3 years and are to be renewed so they don't expire. Also, neither of these certificates require any formal prerequisites but examinees are expected to have at least three to five years of experience working with the relevant technologies that they will be tested on.
NEW QUESTION 84
What is the maximum SHA level of filtering that Threat Intelligence Director supports?
- A. SHA-512
- B. SHA-4096
- C. SHA-256
- D. SHA-1024
Answer: C
Explanation:
Section: Integration
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/623/configuration/guide/fpmc-config- guide-v623/cisco_threat_intelligence_director__tid_.html
NEW QUESTION 85
With Cisco Firepower Threat Defense software, which interface mode must be configured to passively receive traffic that passes through the appliance?
- A. routed
- B. inline tap
- C. inline set
- D. passive
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/interface_overview_for_firepower_threat_defense.html
NEW QUESTION 86
What is the advantage of having Cisco Firepower devices send events to Cisco Threat Response via the security services exchange portal directly as opposed to using syslog?
- A. Supports all devices that are running supported versions of Cisco Firepower.
- B. An on-premises proxy server does not need to be set up and maintained.
- C. All types of Cisco Firepower devices are supported.
- D. Cisco Firepower devices do not need to be connected to the Internet.
Answer: B
NEW QUESTION 87
After deploying a network-monitoring tool to manage and monitor networking devices in your organization, you realize that you need to manually upload an MIB for the Cisco FMC. In which folder should you upload the MIB file?
- A. /etc/sf/DCMIB.ALERT
- B. /sf/etc/DCEALERT.MIB
- C. /etc/sf/DCEALERT.MIB
- D. system/etc/DCEALERT.MIB
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firesight/541/firepower-module-user-guide/asa-firepower-module-user-guide-v541/Intrusion-External-Responses.pdf
NEW QUESTION 88
A mid-sized company is experiencing higher network bandwidth utilization due to a recent acquisition The network operations team is asked to scale up their one Cisco FTD appliance deployment to higher capacities due to the increased network bandwidth. Which design option should be used to accomplish this goal?
- A. Deploy multiple Cisco FTD HA pairs in clustering mode to increase performance
- B. Deploy multiple Cisco FTD HA pairs to increase performance
- C. Deploy multiple Cisco FTD appliances using VPN load-balancing to scale performance.
- D. Deploy multiple Cisco FTD appliances in firewall clustering mode to increase performance.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/fxos/clustering/ftd-cluster-solution.html#concept_C8502505F840451C9E600F1EED9BC18E
NEW QUESTION 89
An engineer is configuring a second Cisco FMC as a standby device but is unable to register with the active unit. What is causing this issue?
- A. The primary FMC currently has devices connected to it.
- B. The licensing purchased does not include high availability
- C. There is only 10 Mbps of bandwidth between the two devices.
- D. The code versions running on the Cisco FMC devices are different
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/firepower_management_center_high_availability.html
NEW QUESTION 90
What is a result of enabling Cisco FTD clustering?
- A. Integrated Routing and Bridging is supported on the master unit.
- B. All Firepower appliances can support Cisco FTD clustering.
- C. Site-to-site VPN functionality is limited to the master unit, and all VPN connections are dropped if the master unit fails.
- D. For the dynamic routing feature, if the master unit fails, the newly elected master unit maintains all existing connections.
Answer: C
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/640/configuration/guide/fpmc-config-guide-v64/clustering_for_the_firepower_threat_defense.html
NEW QUESTION 91
Which command is typed at the CLI on the primary Cisco FTD unit to temporarily stop running high- availability?
- A. configure high-availability disable
- B. system support network-options
- C. configure high-availability resume
- D. configure high-availability suspend
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/610/configuration/guide/fpmc-config- guide-v61/firepower_threat_defense_high_availability.html
NEW QUESTION 92
A hospital network needs to upgrade their Cisco FMC managed devices and needs to ensure that a disaster recovery process is in place. What must be done in order to minimize downtime on the network?
- A. Configure the Cisco FMC managed devices for clustering.
- B. Configure a second circuit to an ISP for added redundancy
- C. Configure the Cisco FMCs for failover
- D. Keep a copy of the current configuration to use as backup
Answer: C
NEW QUESTION 93
A network engineer is tasked with minimising traffic interruption during peak traffic limes. When the SNORT inspection engine is overwhelmed, what must be configured to alleviate this issue?
- A. Enable IPS inline link state propagation
- B. Enable Automatic Application Bypass.
- C. Set a Trust ALL access control policy.
- D. Enable Pre-filter policies before the SNORT engine failure.
Answer: B
NEW QUESTION 94
IT management is asking the network engineer to provide high-level summary statistics of the Cisco FTD appliance in the network. The business is approaching a peak season so the need to maintain business uptime is high. Which report type should be used to gather this information?
- A. Malware Report
- B. Risk Report
- C. Standard Report
- D. SNMP Report
Answer: C
NEW QUESTION 95
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
- A. Child domains have access to only a limited set of widgets from ancestor domains.
- B. Child domains cannot view dashboards that originate from an ancestor domain.
- C. Child domains can view but not edit dashboards that originate from an ancestor domain.
- D. Only the administrator of the top ancestor domain can view dashboards.
Answer: B
Explanation:
Section: Management and Troubleshooting
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide- v60/Using_Dashboards.html
NEW QUESTION 96
An engineer currently has a Cisco FTD device registered to the Cisco FMC and is assigned the address of 10 10.50.12. The organization is upgrading the addressing schemes and there is a requirement to convert the addresses to a format that provides an adequate amount of addresses on the network What should the engineer do to ensure that the new addressing takes effect and can be used for the Cisco FTD to Cisco FMC connection?
- A. Cisco FMC does not support devices that use IPv4 IP addresses.
- B. Update the IP addresses from IFV4 to IPv6 without deleting the device from Cisco FMC
- C. Delete and reregister the device to Cisco FMC
- D. Format and reregister the device to Cisco FMC.
Answer: C
NEW QUESTION 97
What are two application layer preprocessors? (Choose two.)
- A. ICMP
- B. IMAP
- C. SSL
- D. DNP3
- E. CIFS
Answer: B,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Applic
NEW QUESTION 98
Which two routing options are valid with Cisco FTD? (Choose Two)
- A. ECMP with up to three equal cost paths across a single interface
- B. BGPv4 in transparent firewall mode
- C. BGPv4 with nonstop forwarding
- D. BGPv6
- E. ECMP with up to three equal cost paths across multiple interfaces
Answer: A,C
NEW QUESTION 99
A network administrator notices that SI events are not being updated The Cisco FTD device is unable to load all of the SI event entries and traffic is not being blocked as expected. What must be done to correct this issue?
- A. Redeploy configurations to affected devices so that additional memory is allocated to the SI module
- B. Replace the affected devices with devices that provide more memory
- C. Manually update the SI event entries to that the appropriate traffic is blocked
- D. Restart the affected devices in order to reset the configurations
Answer: C
NEW QUESTION 100
A Cisco FTD device is running in transparent firewall mode with a VTEP bridge group member ingress interface What must be considered by an engineer tasked with specifying a destination MAC address for a packet trace?
- A. Only the UDP packet type is supported
- B. The VLAN ID and destination MAC address are optional
- C. The destination MAC address is optional if a VLAN ID value is entered
- D. The output format option for the packet logs unavailable
Answer: C
NEW QUESTION 101
Which two packet captures does the FTD LINA engine support? (Choose two.)
- A. dynamic firewall importing
- B. protocol
- C. application ID
- D. source IP
- E. Layer 7 network ID
Answer: B,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212474-working-with- firepower-threat-defense-f.html
NEW QUESTION 102
What are the minimum requirements to deploy a managed device inline?
- A. passive interface, MTU, and mode
- B. inline interfaces, MTU, and mode
- C. inline interfaces, security zones, MTU, and mode
- D. passive interface, security zone, MTU, and mode
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/650/configuration/guide/fpmc-config-guide-v65/ips_device_deployments_and_configuration.html
NEW QUESTION 103
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION 104
......
Exam Overview
Before attempting the Cisco 300-710 test, the applicants are recommended to undergo the relevant training. The best way to get ready for this certification exam is to enroll for the training course offered by Cisco. There are two courses related to this test: Securing Networks with Cisco Firepower Next Generation Firewall (SSNGFW) as well as Securing Networks with Cisco Firepower Next-Generation IPS (SSFIPS). You can find the details of these options on the official webpage.
Cisco usually doesn’t reveal the details of its certification exams such as their number of questions and their formats. The same true for the 300-710 SNCF test. What we know is that this certification exam lasts for 90 minutes and is available in two languages: English and Japanese. The test is delivered through Pearson VUE, the official testing partner of Cisco. To register for this exam, you need to follow the link on the vendor’s website and then pay the registration fee of $300.
Latest 300-710 Actual Free Exam Questions Updated 145 Questions: https://www.lead1pass.com/Cisco/300-710-practice-exam-dumps.html
Free 300-710 Exam Braindumps certification guide Q&A: https://drive.google.com/open?id=1NDIgGTBfcBH90qR-20IbSdJK2AGdGioM