Authentic Best resources for NS0-175 Test Engine Practice Exam [Q19-Q42]

Authentic Best resources for NS0-175 Test Engine Practice Exam

[2021] NS0-175 PDF Questions - Perfect Prospect To Go With Lead1Pass Practice Exam

NEW QUESTION 19
A C2100 appliance uses _____ to _____ disk drives.

A. one, seven
B. two, seven
C. two, three
D. one, three

Answer: B

NEW QUESTION 20
During the design phase of an NFS-only FlexPod environment, the architect wants to ensure that the proposed switch and storage hardware is fully supported within the FlexPod architecture.
Which resource should they consult to confirm support for the design?

A. NetApp Interoperability Matrix
B. Config Advisor
C. Upgrade Advisor
D. FlexPod Technical Specifications

Answer: B

NEW QUESTION 21
What is the maximum number of power supplies supported in a Cisco UCS 5108 blade server chassis?

A. 0
B. 1
C. 2
D. 3

Answer: C

NEW QUESTION 22
An administrator is designing a FlexPod backup solution that includes replication to a remote site that includes the capability to restore to a prior point in time.
In this scenario, which two technologies are required to accomplish this task? (Choose two.)

A. NetApp SnapRestore
B. NetApp FlexClone
C. NetApp SnapMirror
D. NetApp SyncMirror

Answer: A,C

NEW QUESTION 23
Which two features are supported with vSphere 6 Standard edition? (Choose two.)

A. vCenter Site Recovery Manager
B. thin provisioning
C. Storage DRS
D. Storage vMotion

Answer: A,C

NEW QUESTION 24
Which guide ensures that the NetApp hardware and software components are supported with the version of Data ONTAP that you plan to install?

A. CVD Documents
B. KB Articles
C. Storage Partition Guide
D. System Configuration Guides

Answer: D

NEW QUESTION 25
You are configuring Cisco UCS servers for FC SAN boot and want to perform zoning on your Cisco Nexus 5000 series switches.
In this scenario, which statement is correct?

A. SAN links are required between the Cisco Fabric Interconnects and the Nexus 5000 switches.
B. FC zoning on the Nexus series switches is not supported; zoning can be done only on the Cisco Fabric Interconnects.
C. An iSCSI license on the NetApp storage controller is required.
D. The corresponding FC ports on your NetApp storage array must be configured in LACP mode.

Answer: B

NEW QUESTION 26
Which is a post sales implementation configuration and health check tool for NetApp systems or FlexPod?

A. NetApp Solution Builder
B. NetApp Config Advisor
C. Cisco UCS Sizer for Enterprise Applications
D. Cisco Resource Comparison Tool

Answer: B

NEW QUESTION 27
Which two high availability capabilities are supported in a FlexPod system? (Choose two.)

A. clustered active-active mode Fabric Interconnects
B. Virtual Port Channels configured between the network switches
C. clustered active-standby mode Fabric Interconnects
D. Virtual Port Channels configured between Fabric Interconnects

Answer: B,C

NEW QUESTION 28
Which protocol is currently supported on the Nexus 1000V to support network isolation among virtual machines beyond traditional VLANs for cloud-scale networking?

A. Stateless Transport Tunneling (STT)
B. Virtual Extensible Local Area Network (VXLAN)
C. vPath
D. Overlay Transport Virtualization (OTV)

Answer: B

NEW QUESTION 29
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)

A. FC portsets
B. FC zoning
C. MTU configuration
D. ALUA settings
E. igroup configuration

Answer: A,C,E

NEW QUESTION 30
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?

A. access mode
B. switching mode
C. end host mode
D. trunk mode

Answer: B

NEW QUESTION 31
State whether the following statement is true or false. The sysstat command allows the performance statistics to be viewed, which consists of the present CPU usage, the full amount of network I/O, and the amount of disk I/O.

A. True
B. False

Answer: A

NEW QUESTION 32
Which mode must your Fabric Interconnects be using to participate in the Spanning Tree Protocol (STP) and send Bridge Port Data Units (BPDUs)?

A. Loopguard Mode
B. End Host Mode
C. Switching Mode
D. STP Mode

Answer: D

NEW QUESTION 33
What MTU setting should be configured for VMware ESXi VMkernel Ports and Virtual Switches in a FCoE boot from SAN environment?

A. 0
B. 1
C. 2
D. 3

Answer: B

NEW QUESTION 34
Which of the following are supported interface types?

A. Gigabit Ethernet, copper
B. ATM
C. 10/100 Ethernet
D. Gigabit Ethernet, fiber

Answer: A,C,D

NEW QUESTION 35
Which of the following options log only reports displays Web request data?

A. Web Server Acceleration
B. Web Access
C. Web Details
D. Messages

Answer: C

NEW QUESTION 36
Which two types of Cisco UCS servers are available to be used with a FlexPod Express deployment? (Choose two.)

A. Cisco UCS C-Series
B. Cisco UCS S-Series
C. Cisco UCS E-Series
D. Cisco UCS B-Series

Answer: A,D

NEW QUESTION 37
Which presents a high level ordering of operations for installing VMware ESXi to the SAN-bootable LUN of a host?

A. Map ISO image file, choose ESXi installer, Accept EULA, choose local LSI storage device, confirm root password, unmap ESXi installation image, reboot
B. Map ISO image file, reboot server, choose ESXi installer, Accept EULA, Choose NetApp LUN as installation disk, confirm root password, reboot
C. Map ISO image file, reboot server, choose ESXi installer, Accept EULA, Choose NetApp LUN as installation disk, confirm root password, accept remove existing partitions warning and continue, unmap ESXI installation image, reboot
D. Boot server, choose ESXi installer, Accept EULA, Choose NetApp LUN as installation disk, confirm root password, accept remove existing partitions warning and continue, reboot

Answer: C

NEW QUESTION 38
State whether the following statement is true or false. A multi-mode VIF merges two physical interfaces together where traffic is then active on both of the physical interfaces.