2024 Easy Success EMC D-VXR-OE-23 Exam in First Try
Best D-VXR-OE-23 Exam Dumps for the Preparation of Latest Exam Questions
EMC D-VXR-OE-23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 21
You are planning to install CloudArray Virtual Edition.
Where should you navigate to in VxRail Manager?
- A. Config > Market
- B. Config > General
- C. Config > System
- D. Support > Download
Answer: D
NEW QUESTION # 22
A VxRail administrator is concerned that the Integrated NIC is a single point of failure on VxRail nodes.
How should the network traffic be balanced to increase redundancy?
- A. Across two different ports of the same Integrated NIC.
- B. Across Integrated NIC and PCIe NIC ports
- C. Across two ports on a PCIe NI
- D. Across two Integrated NICs
Answer: B
NEW QUESTION # 23
An environment has two VxRail clusters with the following hardware configuration:
- Cluster-A is using FTT = 2 and FTM = Erasure Coding
- Cluster-B is using FTT = 2 and FTM = Mirroring
A 100 GB VM is planned to be vMotioned from Cluster-A to Cluster-B.
How much more vSAN capacity is consumed in Cluster-B than in Cluster-A?
- A. 150 GB
- B. 0 GB; consumption is unchanged
- C. 167 GB
- D. 100 GB
Answer: A
NEW QUESTION # 24
Which resource enables an administrator to create a procedure for upgrading a VxRail cluster?
- A. Dell ProSupport
- B. VxRail Quick Reference
- C. VxRail Administration Guide
- D. SolVe Online
Answer: D
Explanation:
The resource that enables an administrator to create a procedure for upgrading a VxRail cluster is SolVe Online. SolVe Online is a web-based tool provided by Dell Technologies that offers comprehensive procedures and best practices for various Dell EMC solutions, including VxRail. It provides detailed, step-by-step guidance for a variety of tasks, including upgrades, ensuring that administrators follow the correct procedures to maintain system integrity and minimize downtime.
Reference:
Dell SolVe Online Portal: SolVe Online
NEW QUESTION # 25
Which SolVe procedures are customer viewable and can be found in the Upgrade section?
- A. Software Upgrade
Stretched Cluster Upgrade
Secure Connect Gateway Upgrade - B. Firmware Upgrade
Hardware Upgrade/Expansion
Software Upgrade - C. Network Configuration Upgrade
BIOS Customization
External Storage Integration. - D. Firmware Upgrade
iDRAC Upgrade
vCenter Upgrade
Answer: B
NEW QUESTION # 26
An administrator wants to expand a VxRail cluster by one node. The new node arrived with code that is newer than the cluster version.
What action must be taken before the new node can be added to the cluster successfully?
- A. The new node requires no action and will be downgraded automatically and added to the cluster
- B. The SD card on the new node must be exchanged with a new SD card with the required code version
- C. The cluster must be RASR reset to match the code level of the new node before the node can be added
- D. The cluster must be upgraded to match the code level of the new node before the node can be added
Answer: D
NEW QUESTION # 27
What is a consideration when planning for node expansion of an existing 4-node All-Flash Dell EMC VxRail 4.5.2xx cluster?
- A. New nodes can be hybrid or All-Flash
- B. New nodes must be identical to the existing nodes
- C. vSphere Web Client is used to perform the expansion procedure
- D. Expansion procedure is performed by Dell EMC or a Dell EMC partner
Answer: B
NEW QUESTION # 28
What are two considerations of deploying VxRail Cluster with an existing customer-supplied vCenter Server? (Select 2)
- A. Supports Enhanced Link Mode with other VxRail-managed vCenter Servers
- B. Supports vCenter HA
- C. Uses customer-defined procedures for vCenter LCM
- D. Requires an internal DNS server
Answer: A,C
Explanation:
When deploying a VxRail Cluster with an existing customer-supplied vCenter Server, two key considerations are:
Supports Enhanced Link Mode with other VxRail-managed vCenter Servers: This allows the existing vCenter Server to link with other VxRail-managed vCenter Servers, providing a unified management interface across multiple vCenter instances, enabling seamless operations and better scalability.
Uses customer-defined procedures for vCenter LCM (Lifecycle Management): Since the vCenter Server is customer-supplied, the procedures for upgrading and maintaining it are defined and managed by the customer, rather than being automatically handled by VxRail's built-in lifecycle management tools.
Reference:
Dell VxRail Deployment with Existing vCenter Server Guide: VxRail Deployment Guide
NEW QUESTION # 29
What is the recommended vSphere HA response to a Datastore with All Paths Down event for vSAN HCI Mesh client clusters?
- A. Shut down and restart VMs
- B. Disabled
- C. Power off and restart VMs
- D. Issue events
Answer: C
NEW QUESTION # 30
An administrator must add an additional network card to an existing set of VxRail nodes in their infrastructure. After the network card has been added to each node, the administrator does not see them in use in vCenter.
What must the administrator do to use the newly added uplinks?
- A. Use LCM to update NIC Drivers
- B. Add uplinks to the virtual distributed switch
- C. Use esxcli to install necessary VIBs
- D. Add uplinks to the virtual standard switch
Answer: B
NEW QUESTION # 31
What is the limit of locally cached managed storage included in the CloudArray Virtual Edition license packaged with a VxRail system?
- A. 5 TB
- B. 15 TB
- C. 10 TB
- D. 1 TB
Answer: D
NEW QUESTION # 32
What is the Deduplication algorithm used by vSAN?
- A. SHA-256
- B. SHA-512
- C. SHA-1
- D. SHA-2
Answer: C
NEW QUESTION # 33
Dell EMC VxRail All-Flash nodes have been deployed in a Stretched Cluster configuration.
A storage policy has been configured with:
- PFTT = 1
- SFTT = 0
- FTM = Default
What protection will a VMDK have with this storage policy?
- A. RAID 1 cross-site RAID 1 locally
- B. No cross-site protection RAID 1 locally
- C. RAID 1 cross-site RAID 5 locally
- D. RAID 1 cross-site No local protection
Answer: D
NEW QUESTION # 34
During a maintenance task on a VxRail Appliance, the system LED on vcluster730-esx03.edu.local is required to be enabled so the node can be correctly identified in the physical rack.
Use the simulator to enable the System LED for the node.
Answer:
Explanation:
To enable the system LED onvcluster730-esx03.edu.localfor identification in the physical rack, follow these steps:
* Log in to vSphere Client:
* Open the vSphere Client.
* Enter the username:[email protected].
* Enter the password:VMw@r3!123.
* ClickLogin.
* Navigate to the Host:
* In the vSphere Client interface, navigate to theHosts and Clustersview.
* Expand theVxRail-DCand then theVxRail-Cluster.
* Select the host namedvcluster730-esx03.edu.local.
* Access Host Actions:
* Right-click onvcluster730-esx03.edu.local.
* From the context menu, selectActions.
* Enable System LED:
* In the Actions menu, locate and selectEnable LEDorTurn On Locator LED(the exact wording might vary).
* Confirm the action if prompted.
* Verify LED Activation:
* Check the physical rack to ensure that the system LED onvcluster730-esx03.edu.localis enabled and the node is easily identifiable.
Reference:
VMware vSphere Host Management Guide: vSphere Host Management
=========================
Note: The exact steps to enable the LED might vary slightly based on the version of vSphere Client you are using, but the general process involves selecting the host and using the Actions menu to enable the system LED.
NEW QUESTION # 35
A VxRail administrator is adding a node to an existing VxRail Cluster The node has been racked, cabled and powered on However, the node is not discovered in the vSphere Client Which log file should be analyzed to diagnose the issue?
- A. mystic.log
- B. marvin.log
- C. Icm log
- D. loudmouth log
Answer: D
Explanation:
When adding a node to an existing VxRail Cluster and the node is not discovered in the vSphere Client, the "loudmouth" log should be analyzed. The loudmouth log is crucial for node discovery as it records the communication and discovery processes between nodes in the VxRail cluster. Analyzing this log can help diagnose issues related to node visibility and network communication.
Reference:
Dell VxRail Troubleshooting Guide: VxRail Troubleshooting Guide
NEW QUESTION # 36
What VxRail Manager activities can be performed by a user with the VMware Administrator role?
- A. Build, Manage, and Shutdown Cluster Manage vSAN settings
- B. Build, Manage, Expand, and Shutdown Cluster only
- C. Build, Manage, and Expand Cluster only
- D. Build, Manage, and Expand Cluster Manage HA, DRS, and vSAN settings
Answer: A
NEW QUESTION # 37
Where is the VxRail Dashboard located in the vSphere client?
- A. Hosts and Clusters > Monitor > VxRail
- B. Hosts and Clusters > Configure > VxRail
- C. Menu > VxRail
- D. Menu > Administration
Answer: C
NEW QUESTION # 38
Which level of data protection can be configured across sites in a VxRail Stretched Cluster1?
- A. RAID 6
- B. RAID 1/0
- C. RAID 1
- D. RAID 5
Answer: C
Explanation:
In a VxRail Stretched Cluster, RAID 1 can be configured across sites to provide data protection. RAID 1 (mirroring) ensures that data is replicated across two sites, providing high availability and data redundancy in case one site fails. This configuration helps maintain continuous operations and data integrity in a multi-site deployment.
NEW QUESTION # 39
In which environment is it recommended to enable vSAN deduplication and compression?
- A. VDI Using Full Clones
- B. Mixed Workloads
- C. OLTP Databases
- D. VDI Using Linked Clones
Answer: A
NEW QUESTION # 40
What two failure events cause the vSAN to start rebuilding components immediately on the VxRail system?
(Select 2)
- A. Interlace controller
- B. Capacity device
- C. ESXi host
- D. Storage controller
Answer: B,C
Explanation:
Two failure events that cause vSAN to start rebuilding components immediately on the VxRail system are:
ESXi host failure
Capacity device failure
When an ESXi host fails, vSAN detects the loss of the host and initiates the rebuilding of the affected components to maintain data availability and integrity. Similarly, when a capacity device (such as an SSD or HDD) fails, vSAN starts the rebuild process to ensure that data remains protected and accessible.
Reference:
VMware vSAN Failure Handling: vSAN Failure Handling
NEW QUESTION # 41
Which VxRail network supports Link Aggregation?
- A. VxRail System VMs
- B. Private Management
- C. ESXi Management
- D. vSAN
Answer: D
NEW QUESTION # 42
When configuring Data at Rest Encryption (DARE) on a vSAN cluster, what is required?
- A. vSAN Standard
- B. External Key Management Server
- C. Internal Key Management Server
- D. vSAN Advanced
Answer: B
NEW QUESTION # 43
......
D-VXR-OE-23 Study Material, Preparation Guide and PDF Download: https://www.lead1pass.com/EMC/D-VXR-OE-23-practice-exam-dumps.html
D-VXR-OE-23 Actual Questions 100% Same Braindumps with Actual Exam: https://drive.google.com/open?id=1L90jyKl2O7_dYa9UK_XVbV8mc4diMc_t