2022 Valid NS0-592 Real Exam Questions (Updated) 100% Dumps & Practice Exam
[UPDATED 2022] Network Appliance NS0-592 Questions Prepare with Free Demo of PDF
NetApp NS0-592 Exam Topics:
| Section | Objectives |
|---|---|
| Protocols | -Demonstrate knowledge of ONTAP NAS configurations -Demonstrate knowledge of ONTAP SAN configurations |
| Performance | -Describe ONTAP performance concepts -Demonstrate knowledge of troubleshooting ONTAP performance |
| Hardware | -Demonstrate knowledge of hardware troubleshooting -Demonstrate knowledge of troubleshooting SP or BMC -Describe the hardware components in a Fibre Channel environment -Demonstrate knowledge of the cluster interconnect infrastructure -Describe MetroCluster configurations |
| ONTAP OS | -Describe the tools available for support or troubleshooting -Demonstrate knowledge of ONTAP cluster administration -Demonstrate knowledge of data replication issues -Describe the structure of ONTAP OS -Demonstrate knowledge of how to troubleshoot ONTAP OS -Demonstrate knowledge of how to handle panic events |
| Software-defined ONTAP Solutions | -Describe software-defined ONTAP solutions |
NEW QUESTION 10
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?
- A. Use the ifstat command to collect network performance data for the physical interface.
- B. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
- C. View the active network connections to the node to see if there a large number of active connections.
- D. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.
Answer: B
NEW QUESTION 11
Two weeks ago, your customer experienced a data outage, which caused their MCC to switch over. When the power was restored, they found that 14 disks over three RAID groups had failed, which caused two data aggregates to lose their mirror plexes.
In this situation, before you perform a switchback, which three actions should be taken? (Choose three.)
- A. Delete the failed plexes.
- B. Mirror the unmirrored aggregates
- C. Assign all disks on the remote site to the surviving nodes.
- D. Initiate the aggregate healing phases.
- E. Adjust bridge configuration for the replaced disks.
Answer: B,D,E
NEW QUESTION 12
At a customer site, the storage failover giveback command fails when giving back the root aggregate.
What would be two reasons for this failure? (Choose two.)
- A. The HA interconnect is not operational.
- B. There are active NFS connections.
- C. There are failed disks.
- D. There are active SIS operations running.
Answer: A,C
NEW QUESTION 13
A non-maskable interrupt event occurs. The system panics and then reboots.
In this scenario, what would have caused the panic?
- A. a watchdog timer
- B. a secd process
- C. a volume location distributed database
- D. an ICMP blackhole detector
Answer: A
NEW QUESTION 14
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?
- A. The cloned volume must be split from the source volume before the LAN can be used.
- B. The cloned LUN needs to be mapped to an initiator group.
- C. The cloned LUN must be renamed to a different name than the name of the source LUN.
- D. The cloned LUN must be brought online.
Answer: A
NEW QUESTION 15
Click the exhibit button.
You execute a few commands and many fail, as shown in the exhibit.
What could cause the error?
- A. The mgwd user space process on cluster1-02 failed.
- B. The aggregates were manually brought offline.
- C. The bcomd user space process on cluster1-02 failed.
- D. The cluster-02 node is down.
Answer: D
NEW QUESTION 16
A customer reports that a LUN is offline because the volume is out of space even though the space-reserve parameter is configured to enabled on the LUN.
Which two statements are correct in this scenario? (Choose two.)
- A. The containing aggregate is thin-provisioned.
- B. The volume has snapshots.
- C. The fractional reserve is set to 0%.
- D. Deduplication is inflating the LUN when it is brought online.
Answer: A,B
NEW QUESTION 17
Click the exhibit button.
When you log in to a node, a warning is displayed as shown in the exhibit.
Which statement is correct in this scenario?
- A. The node root volume was moved to a new aggregate.
- B. The node cannot communicate with the rest of the nodes in the cluster.
- C. The partner still hosts the CFO aggregate for the node.
- D. One or more RDB db files are damaged due to an internal software error.
Answer: B
NEW QUESTION 18
A customer called you after a failure in their Microsoft Hyper-V environment on the "SVM1" SVM. The customer wants to enable nondisruptive operations (NDO) to prevent future failures.
In this scenario, which two actions must be performed? (Choose two.)
- A. Verify that SMB2 is enabled.
- B. Verify that SMB3 is enabled.
- C. Verify that the continuously-available option is set on the CIFS share.
- D. Verify that the branchcache option is set on the CIFS share.
Answer: A,C
NEW QUESTION 19
Click the exhibit button.
You are investigating an AutoSupport Disk Redundancy Failed alert. Cluster A lost connectivity to storage bridge BrB1, while cluster B lost connectivity to storage bridge BrA1.
Referring to the exhibit, which three components need investigation? (Choose three.)
- A. FC switch SwB1
- B. storage bridges BrB1
- C. FC switch SwA2
- D. ISL cables
- E. FC switch SwA1
Answer: A,D,E
NEW QUESTION 20
An administrator wants to keep an automatic daily up-to-date copy of a volume at a disaster recovery location.
What should the administrator do to achieve this goal?
- A. Perform an NDMP dump to the remote location.
- B. Perform a volume relocation to the remote location.
- C. Configure a SyncMirror relationship to the remote location.
- D. Configure a SnapMirror relationship to the remote location.
Answer: D
NEW QUESTION 21
You configured iSCSI multipathing on a Windows host to a 2-node ONTAP cluster so that you can attach to some LUNs. You see that the host logging in to both iSCSI LIFs in the ONTAP cluster, and you notice that the igroup is correctly set. After you open Disk Management and rescan for disks, the NetApp LUNs do not show up.
In this scenario, what should be performed to enable the LUNs to be visible to the Windows host?
- A. Set up Selective LUN Mapping (SLM) and try scanning again.
- B. Configure the SVM for FCP and try scanning again.
- C. Set up LUN mapping and try scanning again.
- D. Configure the ONTAP nodes for HA and try scanning again.
Answer: A
NEW QUESTION 22
Click the exhibit button.
A customer is reporting that numbers in the statistics volume show command output appear to be incorrect.
Referring to the exhibit, which statement is correct?
- A. There are operation types that are not listed in the output.
- B. The problem is due to a difference in operation size.
- C. A case with NetApp should be raised to find the root cause.
- D. Perfstat should be used to explain the behavior.
Answer: B
NEW QUESTION 23
A customer has a 2-node MetroCluster. They experienced a complete power loss at site B.
The customer has lost connectivity to site B and now realizes that the DR partner at site A has not taken over the DR partner at site B.
Which two actions must be performed in this scenario? (Choose two.)
- A. On the DR partner at site B, perform the process to heal the root aggregate.
- B. On the DR partner at site A, perform the process to switchover.
- C. Ensure that site B is prevented from serving data or simply powered off (nodes and disk shelves).
- D. On the DR partner at site A, perform the process to heal the data aggregates.
Answer: A,B
NEW QUESTION 24
Which two statements are true about a data volume? (Choose two.)
- A. A data volume can be moved to any aggregate with space for it in the cluster.
- B. A data volume can be accessed by a user connected to any SVM.
- C. A data volume can be accessed by a LIF on any node.
- D. An SVM root or root load sharing mirror volume must be present on every node.
Answer: A,C
NEW QUESTION 25
A new cluster running ONTAP 9.5 has just been installed and you want to create a FlexGroup volume. Which action will accomplish this task?
- A. Use the storage pool create command.
- B. Use the volume size command.
- C. Use the volume create command.
- D. Use the Deploy utility to provision the FlexGroup volume.
Answer: A
NEW QUESTION 26
......
NetApp NS0-592 Exam Certification Details:
| Sample Questions | NetApp NS0-592 Sample Questions |
| Exam Code | NS0-592 NCSE ONTAP |
| Recommended Training | ONTAP Troubleshooting (ILT) |
| Number of Questions | 60 |
| Exam Name | Support Engineer ONTAP Specialist |
| Exam Registration | PEARSON VUE |
| Passing Score | 62% |
| Duration | 120 minutes |
| Exam Price | $150 USD |
NS0-592 Deluxe Study Guide with Online Test Engine: https://www.lead1pass.com/NetworkAppliance/NS0-592-practice-exam-dumps.html