Get Special Discount Offer of 301a Certification Exam Sample Questions and Answers
New 301a Dumps For Preparing LTM Specialist Certified F5 Exam Well
F5 301a exam is designed for individuals who want to become experts in BIG-IP LTM (Local Traffic Manager). BIG-IP LTM Specialist: Architect Set-Up & Deploy certification exam is a specialist-level exam that is intended to validate the skills and knowledge required to architect, set up, and deploy BIG-IP LTM systems. 301a exam is conducted by F5 Networks, a leading provider of application delivery networking technology.
NEW QUESTION # 82
A virtual server is using a TCP profile based on the top-wan-optimized profile for a streaming application Users report videos are loading slowly.
Which setting should be modified in the TCP profile to optimize the application?
- A. Disable Slow Start
- B. Disable Nagle's Algorithm
- C. Disable Selective ACKs
- D. Disable Reset on Timeout
Answer: A
NEW QUESTION # 83
Two LTM devices must be manually configured to restrict in the same Device Group.
What is the correct order of steps to meet this requirement?
- A. Configure VLAN, Configure-Sync IP, Configure Failover type, Establish Device Trust, Sync Device Trust, Create type, Establish Device Sync Device Trust, Create Device Group.
- B. Configure Self-IPs, Configure VLAN, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group
- C. Configure VLAN, Configure Self-IPs, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group.
- D. Configure VLAN, Configure Config-Sync IP. Configure Self-IPs. Configure Failover type. Establish Device Trust, Create Device Group
Answer: C
NEW QUESTION # 84
AN LTM Specialist is deploying an iRule designed to determine the country of origin of an incoming client connection. The iRule needs to be used with an SSL-enabled web application.
Which profile required for the iRule to function properly?
- A. HTTP
- B. UDP
- C. TCP
- D. DNS
Answer: C
Explanation:
Question stem requires the client IP to match the source region, so TCP ?UDP at the transport layer can meet the requirements. The title stem mentions that it is a Web application based on SSL, and it does not mention F5 undertakes SSL offload, So TCP is enough.
NEW QUESTION # 85
An application is making heavy use of a large, high-quality JPEG image file. An LTM Specialist needs to enhance page load times without increasing server load.
Which profile should be applied to the virtual server to perform this task?
- A. Web Acceleration
- B. Response Adapt
- C. FastHTTP
- D. OneConnect
Answer: A
NEW QUESTION # 86
An LTM specialist needs to create a new account with the admin role called "newadmin' and access to all partitions.
Which tmsh command should be executed?
- A. create /auth user newadmin partition-access add {all-partitions {role admin }} prompt for-password.
- B. create /users newadmin partition-access add {all-partitions {role admin JJ prompt for-password.
- C. create /user newadmin partition-access add (all-partitions {role admin }} prompt- for-password.
- D. create / sys user newadmin partition-access add (all-partitions {role admin )} prompt-for-password.
Answer: A
Explanation:
Examining the use of commands, the creation of user is subordinate to auth
NEW QUESTION # 87
An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.
In which should the LTM Specialist perform this upgrade?
- A. Failover this specific guest's active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot
- B. Failover all guests' active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host
- C. Failover all guests' active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot
- D. Relicense the host. Failover all guest's active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot
Answer: C
Explanation:
Switch guest, reactive, license first and then upgrade.
NEW QUESTION # 88
Four members in a server pool have similar hardware platforms. An LTM Specialist needs the load balancing method that can select the server with the fewest entries in the persistence table.
Which load balancing method should the LTM Specialist use?
- A. Least Sessions
- B. Dynamic Ratio
- C. Leas Connections
- D. Observed
Answer: A
Explanation:
Pay attention to the examination questions, the stem is to ask the session to keep the minimum entries in the table.
NEW QUESTION # 89
An LTM Specialist needs to apply SNAT using currently used SNAT pool to a new virtual server.
What needs to be completed before applying that configuration change?
- A. Make sure that the BIG-IP device is NOT operating under heavy load during peak times
- B. Verify that the IP address of the SNAT pool are in the same subnet as the pool members
- C. Review connection for the selected SNAT pool and enlarge it if appropriate
- D. Verify that the IP address of the SNAT pool are in the same VLAN as the pool members.
SNAT does not need to in the same vlan or same network segment as the pool member, as long as the route is reachable , excluding C and D he connection information of the SNAT pool to avoid port exhaustion under high concurrency
Answer: C
NEW QUESTION # 90
An LTM device receives a response string containing "error"
Which monitor type and parameter will mark the HTTP server as down?
- A. HTTP monitor and Receive String "error'' ... flag is up
- B. HTTP monitor. Receive String "down", and set the Reverse option to Yes .... flag is
- C. HTTP monitor and Receive Disable String "error'' .... flag is disable
- D. HTTP monitor, Receive String "error", and set the Reverse option to Yes
Answer: D
NEW QUESTION # 91
An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.
What should be added to increase the performance of the device?
- A. smaller key to the SSL profile
- B. a SPDY profile
- C. a One Connect profile
- D. an HTTP Compression profile
Answer: C
NEW QUESTION # 92
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 10.20.0.2
- B. 192.168.0.10
- C. 10.20.0.1
- D. 10.50.0.2
Answer: A
NEW QUESTION # 93
A virtual server configuration for traffic destined to a server is as shown:
FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.
Based on precedence, which virtual server accepts this traffic?
- A. MyVS1
- B. MyVS2
- C. MyVS4
- D. MyV53
Answer: B
NEW QUESTION # 94
An LTM Specialist regularly provides analytics reports that show that traffic generated by different subnets within the organization. The LTM Specialist needs show the associate department names next the IP addresses in the reports.
Which step should the LTM Specialist take to meet this requirement?
- A. create VLANs for each subnet and set the name accordingly
- B. define active subnets and assign a name to certain subnets
- C. export the report and add the department names manually
- D. use an iRule to change the output of the report
Answer: A
NEW QUESTION # 95
An LTM Specialist has trouble with SNMP traps in the management network The ITM Specialist takes the network capture shown to troubleshoot:
What should the UM Specialist change to capture packets related to this workflow?
- A. the verbose level
- B. the port
- C. the interface
- D. the tcpdump filter expression
Answer: C
NEW QUESTION # 96
An LTM Specialist has recently taken over administration or an LTM device that has experienced resource availability issues. The LTM device will need to be solely used for load balancing and SSL offload. Previously, the LTM device was also used to provide statistical analysis of application traffic. However, that functionality has been moved to a third party solution.
Based on the output below, which configuration change should be made to ensure the LTM module receives the most amount of resources?
- A. Provision AVR to Minimum. Provision LTM at Maximum
- B. Provision AVR to none. Provision LTM to Dedicated
- C. Provision AVR to Minimum, Provision LTM to Dedicated
- D. Provision LTM to Dedicated, Provision AVR to Dedicated
Answer: B
NEW QUESTION # 97
......
F5 301a (BIG-IP LTM Specialist: Architect Set-Up & Deploy) Certification Exam is designed to validate the skills and knowledge of IT professionals in deploying and configuring F5 BIG-IP Local Traffic Manager (LTM) systems. 301a exam is targeted towards individuals who have experience in F5 BIG-IP LTM systems administration and are looking to take their skills to the next level. Achieving this certification demonstrates an individual's ability to architect, set up, and deploy BIG-IP LTM solutions successfully.
F5 301a certification exam is a challenging but rewarding opportunity for IT professionals who are passionate about F5 products and solutions, and who want to demonstrate their expertise in BIG-IP LTM architecture and deployment. Whether you are a seasoned IT professional or a newcomer to the field, this certification can help you achieve your career goals and take your skills to the next level.
Updated 301a Dumps Questions Are Available For Passing F5 Exam: https://www.lead1pass.com/F5/301a-practice-exam-dumps.html
Free UPDATED F5 301a Certification Exam Dumps is Online: https://drive.google.com/open?id=115C-S_xVr6tNjyVFemXqVHEvXe__hUpf