2025 Updated VMware 3V0-21.23 Dumps PDF - Want To Pass 3V0-21.23 Fast
3V0-21.23 Practice Exam Dumps - 99% Marks In VMware Exam
NEW QUESTION # 54
An architect is working on a new VMware vSphere design and notes the following information during interviews with stakeholders:
The company has previously worked with multiple VMware partners
The company has an internal security policy that is referenced in long running contracts The company has an Enterprise License Agreement (ELA) with VMware The company has a multi-year cloud subscription agreement Which of these is a business factor that will impact this design?
- A. The company has an Enterprise License Agreement (ELA) with VMware.
- B. The company has an internal security policy that is referenced in long running contracts.
- C. The company has previously worked with multiple VMware partners.
- D. The company has a multi-year cloud subscription agreement.
Answer: A
Explanation:
The Enterprise License Agreement (ELA) is a business factor that will impact the design because it defines the licensing structure, which directly influences the solution's cost, scalability, and use of VMware products.
The ELA could provide benefits such as discounted licensing costs, a predefined set of VMware products, or specific terms and conditions that must be adhered to in the design.
NEW QUESTION # 55
During a requirements gathering workshop, the customer provides the following information:
- Each host has 2 × 10 GbE NIC
- EtherChannel is not currently configured
- No changes can be made to the physical network
- Network throughput must be prioritized for defined critical services
Which two recommendations should the architect make with regard to virtual networking?
(Choose two.)
- A. Use Network I/O Control with Shares.
- B. Use Route Based on Physical NIC Load.
- C. Use Link Aggregation Control Protocol (LACP).
- D. Use Network I/O Control with Reservation.
- E. Use Network I/O Control with Limits.
Answer: A,B
Explanation:
Use route based on Physical NIC load, to maximize the total throughput. And then use Shares to prioritize.
NEW QUESTION # 56
A customer has a database cluster with 40/60 read/write ratio and a high IOPs requirement with no contention on an all-flash vSAN cluster.
Which two storage settings should be configured for best performance? (Choose two.)
- A. RAID 1
- B. Deduplication and Compression enabled
- C. RAID 5/6
- D. IOPs limits enabled
- E. Deduplication and Compression disabled
Answer: A,E
NEW QUESTION # 57
An architect is creating a design for a new vSphere solution to meet the following business requirement:
REQ001 - Reduce operational expenditure
Which design decision could the architect include in the logical design to satisfy this requirement?
- A. Use heterogeneous hardware for the hosts in all clusters.
- B. Use vSphere Standard licenses on all clusters.
- C. Use vSphere Lifecycle Manager on all clusters.
- D. Use an N + 1 design to define the required capacity on all clusters.
Answer: C
Explanation:
vSphere Lifecycle Manager helps reduce operational expenditure (OPEX) by automating the patching and management of the vSphere environment. It provides centralized management for host updates, ensuring consistency across the environment and reducing the manual effort required for ongoing operations. This leads to reduced operational overhead, which directly addresses the requirement to reduce OPEX.
NEW QUESTION # 58
What are non-functional requirements in the context of a vSphere design?
- A. The physical hardware specifications needed for the vSphere environment.
- B. The expected levels of system performance and responsiveness.
- C. The aspects of the system's behavior and performance, such as security, reliability, and scalability.
- D. The specific tasks and operations the system must perform.
Answer: C
NEW QUESTION # 59
Which is a benefit of using vSAN stretched clusters in VMware Cloud Foundation?
- A. To improve application performance by reducing network latency between availability zones
- B. To reduce the cost by eliminating the need for additional hardware and software components
- C. To enable high availability of virtual machines across different availability zones
- D. To simplify physical network configurations by automatically configuring the required network components
Answer: C
Explanation:
To enable high availability of virtual machines across different availability zones.
vSAN stretched clusters provide high availability by replicating virtual machine data across two geographically separated sites (or availability zones). This ensures that in the event of a failure at one site, the virtual machines can continue running from the other site, minimizing downtime and ensuring business continuity. The solution is particularly useful for disaster recovery and fault tolerance across multiple sites, meeting the requirement for high availability across different availability zones.
NEW QUESTION # 60
An architect is preparing a design for a customer. Based on requirements, the architect recommends an HCI-based infrastructure with all-flash architecture. During the assessment, it is confirmed that the network throughput generated by virtual machines does not exceed 150 Mb/s.
What is the minimum number and type of network adapters in each server that the architect can recommend to ensure requirements are met and there is no single point of failure?
- A. Two 10 GbE network adapters per server
- B. Four 10 GbE network adapters per server
- C. Two 1 GbE network adapters per server
- D. Four 1 GbE network adapters per server
Answer: A
Explanation:
HCI-based infrastructure with all-flash architecture
minimum number and type of network adapters so ensure requirements are met and there is no single point of failure Networking Requirements for vSAN Dedicated 1 Gbps for hybrid configurations Dedicated or shared 10 Gbps for all-flash configurations
NEW QUESTION # 61
A customer provides the following list of requirements for their vSphere platform:
- REQ01 The solution should utilize dual network connections to eliminate single points of failure.
- REQ02 The solution should allow logs to be retained for a period of 30 days.
- REQ03 All user access to the platform should be recorded for audit purposes.
- REQ04 The solution should allow the management of multiple ESXi hosts.
- REQ05 The solution should allow users to view the remote console of virtual machines.
Which two of the listed requirements would be classified as non-functional requirements? (Choose two.)
- A. The solution should allow the management of multiple ESXi hosts
- B. The solution should allow logs to be retained for a period of 30 days
- C. The solution should allow users to view the remote console of virtual machines
- D. All user access to the platform should be recorded for audit purposes
- E. The solution should utilize dual network connections to eliminate single points of failure
Answer: B,E
NEW QUESTION # 62
Refer to the exhibit.
During a requirements gathering workshop, the customer shares the following about their existing ESXi host virtual networking infrastructure:
The customer confirms that:
- Each ESXi host has approximately 200 virtual machines.
- They want to maximize the number of concurrent virtual machine migrations.
- When placing a host in maintenance mode, it takes a long time to evacuate the virtual machines.
Which two recommendations should the architect make in order to help the customer overcome their challenge? (Choose two.)
- A. Use 10 GbE NICs instead of 1 GbE
- B. Use the 3 pNICs and bundle them in a link aggregation group (LAG) configuration
- C. Configure the network to use MTU for the VMotion VMKernel to 1,600 bytes
- D. Create an additional standard switch with pNIC3 to use for vMotion
- E. Configure the network to use MTU for the VMotion VMKernel to 9,000 bytes
Answer: A,E
NEW QUESTION # 63
An organization's data scientists are executing a plan to use machine learning (ML). They must have access to graphical processing unit (GPU) capabilities to execute their computational models when needed. The solutions architect needs to design a solution to ensure that GPUs can be shared by multiple virtual machines.
Which two solutions should the architect recommend to meet these requirements? (Choose two.)
- A. vSphere Bitfusion
- B. vSGA
- C. vSphere DirectPath I/O
- D. AMD MxGPU
- E. NVIDIA vGPU
Answer: A,E
NEW QUESTION # 64
An architect is finalizing the design for a new vSphere platform based on the following information:
- All Windows virtual machines will be hosted on a dedicated cluster for licensing purposes.
- All Linux virtual machines will be hosted on a dedicated cluster for licensing purposes.
- All management virtual machines will be hosted on a dedicated cluster.
- A total of ten physical sites will be used to host virtual machines.
- In the event of one physical datacenter becoming unavailable, the manageability of the virtual infrastructure in the remaining data centers should not be impacted.
- Access to configure the management virtual machines via vCenter Server must be controlled through the management Active Directory domain.
- Access to configure the Windows and Linux virtual machines must be controlled through the resource Active Directory domain.
- The management and resource Active Directory domains are part of separate Active Directory forests and do not have any trusts between them.
- The design will use Active Directory with Integrated Windows Authentication.
How should the architect document the vCenter Server configuration for this design?
- A. Deploy a vCenter server for the management cluster. Deploy a vCenter Server for all remaining clusters. Create a shared SSO domain for each physical site.
- B. Deploy a vCenter Server for the management cluster with a dedicated SSO domain. Deploy a vCenter Server for all remaining clusters and use a dedicated SSO domain for each physical site.
- C. Deploy a vCenter Server for the management cluster. Deploy a vCenter Server for all remaining clusters. Create a shared SSO domain across all physical sites.
- D. Deploy a vCenter Server for the management cluster with a dedicated SSO domain. Deploy a vCenter Server for all remaining clusters and use a dedicated SSO domain into a single physical site.
Answer: C
NEW QUESTION # 65
An architect is designing a new vSphere environment to meet the following requirements:
- The environment must support 5,000 virtual machines.
- The environment will be built initially using 350 hosts.
Which vCenter Server appliance deployment size should the architect specify for the design?
- A. Small
- B. Medium
- C. Tiny
- D. Large
Answer: D
Explanation:
The environment "must" support "5,000" virtual machines.
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vcenter.upgrade.doc/GUID- FB268055-5D36-4624-A64C-9800D3FCB689.html Large environment (up to 1,000 hosts or 10,000 virtual machines)
NEW QUESTION # 66
A customer requires the use of data encryption to ensure data is not accessible when a drive is removed from the primary storage platform. However, there is also a requirement to use deduplication and compression against all workloads in order to conserve space.
Which solution meets the customer requirements?
- A. Data-in-transit encryption
- B. Encrypted backups
- C. Array-based encryption
- D. OS-level encryption
Answer: C
Explanation:
Array-based encryption provides the same benefits as SEDs (self-encrypting drives), in that the drive shows no readable data once it is removed from the array. That means drives don't need to be physically destroyed when they are removed, which brings cost, security and environmental benefits.
NEW QUESTION # 67
An architect is working on the design documentation for a new vSphere solution. The architect has completed a conceptual model based on the following requirement:
REQ001 - The solution must use shared storage
What could the architect include in the logical design to meet this requirement?
- A. The use of an HCI solution for a datastore
- B. The use of File Based Storage, including the list of permissions applied to the share
- C. The use of an NFS mount point, including the IP address of the NFS server it is hosted on
- D. The use of an all flash vSAN datastore
Answer: D
NEW QUESTION # 68
During a workshop for a design project, the following information is shared:
Develop and maintain strong relationships with key stakeholders and partners to promote collaboration.
Maintain high standards of quality and professionalism in all aspects of the project.
Build a strong foundation for future projects, including cloud infrastructures.
Ensure project timelines and milestones are met by effectively managing resources and priorities.
Which of these would be classified as a business outcome of the project?
- A. Ensure project timelines and milestones are met by effectively managing resources and priorities.
- B. iDevelop and maintain strong relationships with key stakeholders and partners to promote collaboration.
- C. Maintain high standards of quality and professionalism in all aspects of the project.
- D. Build a strong foundation for future projects, including cloud infrastructures.
Answer: D
Explanation:
A business outcome refers to a result or impact that directly contributes to the strategic goals of the organization, typically focusing on long-term objectives or future benefits. In this case, building a strong foundation for future projects, including cloud infrastructures, aligns with the business goal of positioning the organization for future success and scalability. This outcome is about preparing the organization for the future, which is a key business-driven result.
NEW QUESTION # 69
An architect is designing a new vSphere architecture and notes the following information during the design workshops:
vSphere distributed switches (VDS) will be used for all vSphere clusters. Switch naming will be based on cluster name, resource type function and switch number.
Port group naming will be based on function, role and VLAN number range.
Each host has two physical network cards each with two NIC ports:
- Card A aligns to vmnic0 and vmnic1
- Card B aligns to vmnic2 and vmnic3
The architecture must provide resilient network connections.
Management Services will use VLAN ID 43.
Virtual machines access VLAN ID 100.
The vSphere infrastructure will use a hyper-converged storage architecture.
How should the architect document the VDS physical design based on the noted information?
- A. vSwitch Prod_DVS_01 will have 4 uplinksPort group name "pg_mgmt"- uplink = vmnic0, vmnic2- teaming policy = active/passivePort group name "pg_VM"- uplink = vmnic1, vmnic3- teaming policy = active/passive
- B. vSwitch Prod_DVS_01 will have 2 uplinksPort group name "pg_mgmt_43"- uplink = vmnic0- teaming policy = active/passivePort group name "pg_VM_100"- uplink = vmnic1- teaming policy = active
/passive - C. vSwitch Prod_DVS_01 will have 4 uplinks Port group name "pg_mgmt_43"- uplink = vmnic0, vmnic1- teaming policy = active/passivePort group name "pg_VM_100"- uplink = vmnic2, vmnic3- teaming policy = active/passive
- D. vSwitch Prod_DVS_01 will have 4 uplinksPort group name "pg_mgmt_43"- uplink = vmnic0, vmnic2- teaming policy = active/passivePort group name "pg_VM_100"- uplink = vmnic1, vmnic3- teaming policy = active/passive
Answer: D
NEW QUESTION # 70
What are two valid use cases for VMware Cloud Foundation remote clusters? (Choose two.)
- A. Provide disaster recovery for an existing workload domain.
- B. Enable vSphere with Tanzu on a cluster deployed at a remote location.
- C. Deploy a cluster within the same rack as the central VMware Cloud Foundation instance.
- D. Transform virtual machines to vSphere with Tanzu containers.
- E. Provide resources for virtual machines at an edge location.
Answer: B,E
Explanation:
Enable vSphere with Tanzu on a cluster deployed at a remote location.
VMware Cloud Foundation remote clusters can be deployed to extend the functionality of vSphere with Tanzu to remote locations. This allows for containerized workloads to be managed and orchestrated using the same tools as the primary environment, providing consistent management of Tanzu clusters across multiple sites.
Provide resources for virtual machines at an edge location.
Remote clusters can be deployed at edge locations to provide computing resources for workloads that need to run close to the data source. This use case is particularly useful for applications that require low latency or need to process data locally before sending it to the central cloud infrastructure.
NEW QUESTION # 71
Which requirement would be classified as a functional requirement within the application design documentation?
- A. Administrators must monitor the network traffic of the desired systems.
- B. The application must be capable of handling 200 transactions per second.
- C. Penetration testing must be executed quarterly with a pass rate of 80% or higher.
- D. The application must be hosted with redundancy levels of N+1 or better.
Answer: A
Explanation:
Functional requirements describe what a system or solution must do. The requirements include the following categories:
Business rules: For example, the architecture must support both the primary and secondary data centers.
Administrative functions: For example, network and security administrators must monitor the network traffic of the desired systems.
NEW QUESTION # 72
An architect is designing a vSphere-based application hosting solution in a brownfield site.
The following information has been provided during the requirements gathering workshop:
The solution should support 5,000 compute workloads across two physical sites.
The CFO has approved budget for the purchase of new server and network hardware only.
The existing storage array is currently Fibre Channel connected with 2 x 8 Gbps interfaces to a dedicated Storage Area Network (SAN) fabric.
The existing storage array does not support integration with vSphere API for Storage Awareness.
The existing storage array can be configured to support NFS storage.
The existing vSphere administration team will responsible for operational management of the new solution.
Which storage technology should the architect recommend based on these requirements?
- A. VMware vSAN
- B. vSphere Virtual Volumes (vVols)
- C. Fibre Channel
- D. iSCSI
Answer: C
Explanation:
Fibre Channel is the Recommended Storage Technology for the Brownfield vSphere Deployment Given the constraints of the brownfield site, the existing infrastructure, and the approved budget, the architect should recommend leveraging the existing Fibre Channel storage technology.
Here's the reasoning based on the provided requirements:
Utilize Existing Storage Array:The crucial constraint is that the budget is only for new server and network hardware, explicitly excluding the purchase of a new storage array. The solutionmustutilize the existing storage array.
Existing Fibre Channel Connectivity:The current storage array is already connected via Fibre Channel with a dedicated SAN fabric (2 x 8 Gbps interfaces). This existing infrastructure can be directly leveraged with new servers equipped with Fibre Channel HBAs.
Budget Alignment:Reusing the existing Fibre Channel SAN aligns with the budget approval for only new server and network hardware (to connect the servers to the existing SAN). Introducing a different storage technology like iSCSI or NFS as the primary method would likely require significant network infrastructure changes or additions beyond standard server networking, which may not be covered by the approved budget for "new server and network hardware only." While the arraycansupport NFS, the existing high-speed, dedicated storage connectivity is Fibre Channel.
Incompatibility with vVols:The existing storage array does not support vSphere API for Storage Awareness (VASA), which is a mandatory requirement for implementing vSphere Virtual Volumes (vVols). Therefore, vVols is not a viable option with the current storage hardware.
vSAN Not Applicable to Existing Array:VMware vSAN is a software-defined storage solution that pools local storage from ESXi hosts. It does not directly utilize external Fibre Channel SAN arrays as its primary storage pool in the standard configuration. Implementing vSAN would require a significant investment in server local storage, which falls outside the scope of using theexisting storage array.
Manageability:The existing vSphere administration team is responsible for operational management. Fibre Channel storage is a mature and commonly used storage technology in vSphere environments, meaning the existing team is likely to have the necessary skills to manage it.
While the existing arraycanbe configured for NFS, leveraging the existing Fibre Channel connectivity is the most direct and budget-aligned approach given that the SAN fabric and FC interfaces are already in place and the budget is restricted to server and network hardware for connectivity.
NEW QUESTION # 73
An architect is working on a security design for a shared storage environment. The storage array provides connectivity by the NFS protocol.
Which two design decisions could the architect include for this solution? (Choose two.)
- A. Create a dedicated storage network
- B. Create dedicated volumes for sensitive data
- C. Create a dedicated Fibre Channel network
- D. Create a dedicated VLAN
- E. Create a challenge handshake authentication protocol (CHAP) password to prevent unauthorized access
Answer: A,D
Explanation:
Create a dedicated storage network:
Creating a dedicated storage network ensures that storage traffic is isolated from general network traffic, improving both security and performance. This design choice helps prevent unauthorized access, minimizes the potential for network congestion, and ensures that storage traffic is not impacted by other workloads or services on the network.
Create a dedicated VLAN:
By placing storage traffic on its own VLAN, the architect ensures further network segmentation. This VLAN can be used exclusively for NFS traffic, improving both security and performance. It also allows for easier management and monitoring of storage traffic, while helping prevent unauthorized access from other parts of the network.
NEW QUESTION # 74
An architect has been tasked with designing a greenfield hosting platform.
As part of a workshop, it is identified that the new solution must support the following:
Provide a centralized way to enforce virtual network security policy
Provide network security for both virtual machines and containerized applications Deny network access between all workloads by default Linked services should be connected to the same virtual port groups by default Support for the security teams network monitoring solution Which elements should the architect include in the design to meet the identified requirements?
- A. Distributed Virtual Switches, Access Lists and Promiscuous mode
- B. VMware NSX, Distributed Firewalls and Port Mirroring
- C. VMware Carbon Black, Distributed Virtual Switches and Traffic Filtering
- D. VMware Standard Switches, Access Lists and Promiscuous mode
Answer: B
Explanation:
VMware NSX: NSX provides a centralized platform for network virtualization and security, which aligns with the requirement for enforcing virtual network security policies. It can manage network segmentation, security policies, and micro-segmentation across the entire environment, including both virtual machines and containerized applications.
Distributed Firewalls: NSX's distributed firewall allows for micro-segmentation, meaning that network access is denied between workloads by default, and access controls can be applied based on security policies. This meets the requirement of denying network access by default.
Port Mirroring: Port mirroring in NSX can integrate with the security team's network monitoring solutions. It enables the security team to capture traffic for monitoring and analysis, addressing the requirement for network monitoring support.
NEW QUESTION # 75
Which two of the listed requirements would be classified as manageability non-functional requirements- (Choose two.)
- A. vSphere Fault Tolerance must be supported to improve application uptime
- B. ESXi host updates must be installed within one week of release
- C. The vSphere environment must support administrator password rotation
- D. ESXi clusters must scale to 500 concurrent virtual machines
- E. ESXi clusters must scale when compute resources are sustained above 70% for five business days
Answer: B,E
Explanation:
Functional requirements explain how the system must work, while non functional requirements explain how the system should perform.
https://enkonix.com/blog/functional-requirements-vs-non-functional/
NEW QUESTION # 76
A Cloud Service Provider wants to introduce backup as a service for a customer's vSphere-based virtual machines.
The following information is noted:
- They have a single four-port (2 × 10 GbE and 2 × 1 GbE) NIC per ESXi host
- All top-of-rack (ToR) switches are 10 GbE and fully populated
- The backup traffic must not impact existing services.
Which two recommendations should the architect make to help the customer incorporate the service?
(Choose two.)
- A. Replace the existing NIC with a two-port 25 GbE NIC per ESXi host
- B. Enable and tag traffic on the backup distributed port group
- C. Match the Class of Service (CoS) and Differentiated Services Code Point (DSCP) values to the physical network
- D. Add a new two-port 10 GbE NIC per ESXi host
- E. Create a new virtual switch using the 1 GbE uplinks
Answer: B,C
NEW QUESTION # 77
......
VMware 3V0-21.23 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Updated Verified 3V0-21.23 Q&As - Pass Guarantee: https://www.lead1pass.com/VMware/3V0-21.23-practice-exam-dumps.html
3V0-21.23 Certification with Actual Questions: https://drive.google.com/open?id=1HW-k3AoDLT5I3bugjd1KoQt5sSGJia6p