Professional materials

One of the most obvious advantages of our 352-011 quiz materials is their profession, which is realized by the help from our experts. We invited a large group of professional experts who dedicated in this area for more than ten years. To improve the accuracy of the 352-011 ebook materials, they keep up with the trend closely. We can assure you that each page was investigated by them with effort, sand some difficult and confusing points have added more details for your reference. Before you make your decisions of our 352-011 real test questions: Cisco Certified Design Expert Practical Exam, download the free demos have a look, you will be more acquainted with 352-011 quiz materials.

In this high developing society, we are facing a great deal of problems. It is of vital importance to conquer them and being competitive in reality. Actually, some meaningful certificates are of great importance, which is an obvious prove of your capacity. So we all know the necessity of mastering some necessary certificates so to help you get the certificates of the Cisco Certified Design Expert Practical Exam exam, our 352-011 real test questions: Cisco Certified Design Expert Practical Exam are here to improve your possibilities of getting it with the most scientific content and professional materials. They are indispensable help for your success. Now please get an overall look of their details.

DOWNLOAD DEMO

Different versions for your reference

With three versions of products, our practice materials can satisfy different taste and preference of customers with different use practice, and 352-011 ebook materials are PDF & Software & APP version. Here are some detail features of them as follows. PDF version of 352-011 quiz materials ---this version has clear interface to read and practice, supportive to your printing request and are suitable to use by phone as well as other digital devices. Software version of 352-011 quiz materials ---this version can offer the Simulation of real Cisco Certified Design Expert Practical Exam exam to help you get familiar with atmosphere, and you will get the real exam practice condition when dealing with the real exam. Without restriction of installation and can install it more than once! Please remember it is supportive Windows operation system only. APP version of Cisco Certified Design Expert Practical Exam quiz materials ---apply to different digital devices and can be used on condition that without data.

Professional knowledge for the exam

Without amateur materials to waste away your precious time, all content are written for your exam based on the real exam specially. There are adequate content to help you pass the Cisco Certified Design Expert Practical Exam exam with least time and money. It is quite true that our high quality and accuracy 352-011 real test questions: Cisco Certified Design Expert Practical Exam are also affordable for everyone. We also offer some benefits such as discounts at irregular intervals for your trust. If you still have a skeptical attitude towards our 352-011 ebook materials, please download our free demos as an experimental use. We will bring you tremendous success more than you can imagine. According to data from former exam candidates, the passing rate has up to 98 to 100 percent, the soon you choose our 352-011 quiz materials, the quicker you can get the desirable outcomes.

Cisco Certified Design Expert Practical Sample Questions:

1. Which feature must be part of the network design to wait a predetermined amount of time before notifying the routing protocol of a change in the path in the network?

A) Throttle timer
B) Transmit delay
C) Interface dampening
D) SPF hold time

2. A multisite data center network runs OSPF and DWDM point-to-point interfaces for site to-site connectivity.
Which method to detect interfaces the fastest?

A) interface event dampening
B) LoS/AJS event faults
C) fast-hello> timers
D) UDLD

3. Which three options are IS-IS design considerations when connecting two Layer 3 switches directly using a 10 GBASE-T cabling and formatting an IS-IS neighbor adjacency?

A) The default IS-IS network type is point-to-point so a DIS is not elected
B) The hello and dead timers must match for two IS-IS routers to become adjacent
C) Faster IS-IS hello and dead timers increase bandwidth and CPU use, and may cause instability
D) The area, levels, and interface MTU parameters must match, and system MTU must be unique for two IS-IS routers to become adjacent
E) A DIS is elected between the IS-IS neighbors and the elected Dis is pre-empted if a router with a lower system ID is connected
F) A DIS is elected between the IS-IS neighbors and the elected DIS is pre-empted if router with a higher system ID is connected
G) The IS-IS hello and dead timers should be tuned to detect failures as quickly as possible

4. A data center provider has designed a network using these requirements
Two data center sites are connected to the public internet
Both data centers are connected to different Internet providers
Both data centers are also directly connected with a private connection for the internal traffic can also be at this direct connection The data center provider has only /19 public IP address block Under normal conditions, Internet traffic should be routed directly to the data center where the services are located. When one Internet connections fails to complete traffic for both data centers should be routed by using the remaining Internet connection in which two ways can this routing be achieved? (Choose two)

A) One /20 block is used for the first data center and the second /20 block is used for the second data center. Each /20 block is only sent out locally. The /19 block is sent out at both Internet connections for the backup case to reroute the traffic through the remaining internet connection
B) One /20 block is used for the first data center and the second /20 block is used for the second data center. The /20 block from the local data center is sent out with a low BGP weight and the /20 block from the remote data center is sent out with a higher BGP weight at both sites
C) One /20 block is used for the first data center and the second /20 block is used for the second data center. The /20 block from the local data center is sent out with a low BGP local preference and the /20 block from the remote data center is sent out with a higher BGP local preference of both sites
D) The data center provider must have an additional public IP address block for this routing
E) One /20 block is used for the first data center and the second /20 block is used for the second data center. The /20 block from the local data center is sent out without path prepending and the /20 block from the remote data center is sent out with path prepending at both sites
F) BGP will always load-balance the traffic to both data center sites

5. Which two conditions are required for successful route aggregation? (Choose two)

A) Contiguous prefix allocation
B) Matching traffic aggregation with route aggregation locations
C) Consistent prefix allocations per network
D) Logical separation between zones or layers within networks
E) Physical separation between zones or layers within networks

Solutions: